Questions & Answers for: Dodge Ram 1500 318 engine

Question about 1996 Ram 1500 Club Cab

1 Answer

94 dodge truck,318 engine,standered,1/2 ton, running rich at idle,engine warm Have you run a self test? any codes, with those it can help resolve issue of rich run.

Ad

Question about 1996 Ram 1500 Club Cab

2 Answers

...318 engine The order should be stamped on your intake manifold right under the air cleaner. My '97 1500, 5.2, 318 firing order is 1-8-4-3-6-5-7-2 Hope this helps 1987 dodge ram350 with 5.9 motor what ...

Ad

Question about 1996 Ram 1500 Club Cab

1 Answer

...of engine were are core plug on 2001 dodge ram pickup engine 318 ci. remove the tranny. there is one on each side of the crank in the block. They are 1 5/8" plugs. Make sure the new ones are

1990 dodge ram 318, white smoke coming from engine compartment and smells sweet? Your head gasket is blown. Get it fixed soon before you ruin the engine.

distributor firinng order wiring diagram 1998 ram 1500 318 4x4 distributor firinng order wiring diagram ram 1500 318 engin 1998 1-8-4-3-6-5-7-2 Clockwise rotation. #1 should be marked on the cap. GO ...

318 engine in 95 Dodge Ram 1500. Replaced sensors, hoses, and fuel. Engine cranks and idles, but will not accellerate. Spits and sputters when attempting to increase RPM. Fuel pressure at 53psi. Where

engine has warmed up to temp if this is a 318 they had a problem with blowing out the valley pan under the intake causing a large vacuum leak. it will also us oil because of this. you can run a vacuum

...318 engine no spark no signal 1999 Dodge Ram 1500 318 engine no spark no signal to coil i changed cam positioner sensor and crank positioner sensor still no spark could it be a bad wire ...

Question about 2000 Ram 1500 Truck

1 Answer

...engine into the truck that had the 318.Everything went well and we even got the 360 to turn over and start but it will not stay running at idle we have to keep feathering the throttle to keep the ...

...318 V-8 INTO MY 97 RAM 1500 THAT HAD THE 360 IN IT. NOW THE ENGINE TURNS OVER BUT WONT START. NOT SURE WHY BUT DO i NEED TO CHANGE THE COMPUTERS AS WELL? Yes you must install the whole wiring harness ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...