Questions & Answers for: 27j s100 sharp tv

...27J-S100 TV will come on for a moment and then go off. If you leave it plugged in it will not come back on at all, but if you unplug it for a short period then plug it back in, it will come on again ...

Ad

27J-S100? 1) Solder any / all bad connections 2)troubleshoot,locate and replace any bad parts in pincushion circuit....start with pin amp output....... 3)No problem found ?.........could be bad yoke..

Ad

Question about 27J-S100 TV

1 Answer

Need a new remote What kind of a remote can I purchase to replace the old remote? The input button stopped working and we can't use it without it. A Phillips universal remote will work. Just program ...

27J-S100 without a remote? You don't. A good "universal remote" available from Radio Shack (Phillips) for about $15 will provide access to all TV adjustments. Easy to program for all TV models, VCR's,

The TV will shut off after a few minutes and then cannot be turned back on until you unplug and replug it. Then it will shut off again after a few minutes. How can I fix that? How much would a repair ...

...sharp 27" model: 27j-s100 or diagram. thank you for his help I looked at the same chassis I have and the resistor has color bands green blue silver gold wich is a .56 ohm 5% 1/2 watt ...

27J-S100 CRT TV--need to know what is the best possible hook-up (HDMI, Component, S-Video, or Composite) for pic quality. Thanks! CRT-(Tube tv).Dosen't support HDMI cables.S-Video cable.Only on some a

27J-S100 How to adjust contrast?? Picture is OK but needs contrast ajusted, There are actually two adjustment access holes (focus and contrast) on the back of that model. Here is a makeshift map... On

problem with degaussing coil locking out main control whenever the degaussing coil is plugged into the circuit it only run for a while and cut off. when coil is unplugged it runs continously Check the

tuner not working and its good all the voltages are there could be but this is not a extremely expensive set, Sometimes the tuner if bad has bad solder connections on the board INSIDE the tuner, most ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...