Questions & Answers for: Goodman 22 250

...OF FILTER NEEDED IN THIS UNIT PLEASE THANK U MOST ALL GOODMAN ( UP TO 3 TONS)INTERNAL FILTERS ARE 22" x 22" X 1". YOU CAN GET THEM ON LINE AT www.filtera.com. ALWAYS TAKE A TAPE RULE AND OPEN THE ...

...22 in 4oz increments allowing 5min in between each time you add until you are in the "zone". When you do this, your head pressure needs to be 225-250. if you need to cover the coil or block the ...

22 scale, temp, and when it gets to 90, add another 27degrees to that which would be 117degrees on the scale and the head pressure will be right around 250 P.S.I. The charge will be very close give or

...the only reason to change the inside unit when you change the outside unit is because it's a R-22 system and your going back with a 410A system. They just discontinued R-22 equipment this year ...

...to get a new unit. The biggest thing right now is availability. They have stopped production of R-22 equipment and will continue to make R-22 refrigerant for 10 more years, but for the most part

...fo him to say :) Thanks much Mike in Dallas Hi, and no, no, no,!! There is still plenty off the R-22 freon units that have been made, and there is plenty of the R-22 to last for another 15 years or ...

any diagrams on installing a 410A TXV on a R-22 Evap coil? You don't install a 410A TXV on an R-22 Evaporator coil. If converting your system to a 410A, then you must be using a 410A condenser, and an

I have a goodman Model CKL 36-1K . It says Factory Charge oz R22 . Does that mean it uses R22 freon? The guy who sold it to me says it uses 410a and was only 2 or 3 years old. The serial # is ...

...is only 125psig. The manual say it should be 240psig. What is the problem? what refrigerant are you using? with r-22 the high side should be around 230 to 250 psi and suction should be 68 to 70

...talks about what type of filter you need here: http://www.alpinehomeair.com/related/GPH13M%20R-22%20Tech%20Manual%20RT6332003R11.pdf ...