...engine, etc) work fine. I checked the dimmer switch and it works fine (dims the outside temp display & radio). please advice, have you solved the problem? I have the same one on my Sebring. Many ...
...2008 chrysler sebring. I just had the oil changed and the same light keeps coming on saying "change oil" how do i turn it off? Try pressing the gas pedal all the way to the floor three times, be sure ...
...switch and it works fine I also had the instrument panel go out yesterday on our 2008 Sebring LX. I wish someone could give clear answers to the problem without bringing it down to the dealership.
2008 2.7 Chrysler sebring and the engine light came on did you disconnect any wire connectors in the process ? make sure you have the air filter housing correctly fastened . Could be a coincidence. Go
...Chrysler Seabring 2008 Seabring Convertible gives me a Change Oil Message each time I start the engine. TRY RESETTING OIL CHANGELIGHT BY TURNING THE IGNITION SWITCH TO THE ON POSITION WITH ENGINE ...
Question about 2008 Sebring
2008 chrysler sebring my engine light was blinking on and off. My car started to shake and was hegistant to pull. Use the internet to look up the codes or ifyou have them, put then on hereStill need a
2008 chrysler sebring touring p0457 P0457 engine code 2008 chrysler sebring engine light on, gas cap on. What to do? Should I bring it to the shop? Any advice? Or suggestions? I would replace the cap ...
2008 Chrysler Sebring Check Engine Light Code P2004 I have a 2008 Chrysler Sebring LX 2.4L engine with a check engine light on. The code is P2004 - Intake Manifold Runner Control Stuck Open. What will
Question about 2008 Sebring
2008 chrysler sebring engine light blinking an wont accellerate Won't acellerate cuts off hesitates A little late for reply but if that light is blinking while running stop driving,this indicates a ...
Question about 2008 Sebring Convertible
...2008 Chrysler sebring convertible, changed all spark plugs & coil pack. Engine light continues to come on with this code ? Recheck all work you have done. Sometimes folks replace the wrong coil ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions