Questions & Answers for: 2004 pontiac grand prix hub

Pontiac Gran Prix. I am needing to know the torque specs for those? ok the hub to steering knuckle bolts are 96 ft lbs,the caliper bracket to steering knuckle are 133 ft lbs,and the axle nut is 159 ft

Wheel bearing torque I am needing the wheel bearing specs for a 2001 pontiac grand prix Front: Mounting bolts 96 ft/lbs Axle nut 159 ft/lbs Rear: Mounting bolts 55 ft/lbs

...2004 grand prix gt 3.8 engine head torque table Whaat is 2004 grand prix gt 3.8 engine head torque specs table Go to autozone.com create a free account put in you cars model year etc... then look at ...

...2004 pontiac grand prix gt. The rear wheel bearing assembly was just replaced. what would cause this? Hi, the wheel speed sensor and tone ring are built into the bearing/hub assembly. Make sure the ...

...bearing (right & left wheel) and now I have to replace the left one again.  The thing about 04 grand prix gt they have a wheel/hub bearing problems.  GM never recalled for this ...

...are the sensors on the 2004 pontiac grand prix rotors traction control and abs system sensors the abs sensor is in the frnt wheel bearing hub,and the traction control sensor is in the ...

...bearing torque What are the correct torque specs for the 3 hub assembly bolts, and for the axle nut? Better late than never Brucy....CLICK HERE TO SEE YOUR WHEEL BEARING GUIDE. Repair Guides Front ...

...a 2006 Pontiac grand prix gt on the front wheel bearing hub assemnbly It shouldnt have torque spec more of press preference to press the bearing in the bolt should be put on with codder pin to ...

...pontiac grand prix 2006 Front wheel bearing torque is usually about one uga dugga. See the link. Make sure you pinch the bearing up all the way until you can't turn the wheel. That makes certain the ...

2004 Pontiac Grand Prix gt2 torque specs for front left wheel hub, 3 bolt I usually just go to 2 ugga duggas and call it good.