kx250f hard starting my kawasaki kx250f 2004 hard starts when hot. odds are your your intake valve lash is tighter then spec or gone. check that first
what are the valve clearances for 2004 kx250f for a standard clearance use .05 on the exhaust and .04 on the intake.
timing of my chain I would like have a shema of the timing for the kx250f 2004 go to cyclepedia.com and you can download a manual for about 20 bucks.
does 06 rmz450 rear wheel fit kx250f 04 05 No it is a different size carrier and ring set on the rim, the hub is probably larger on the rmz450 then the kx250f
what are the torque specs on a 2004 kx250f faster than ur mom
2007 kx250f shifts up fine but will not shift down 2007 kx250f shifts up fine, but will not shift down have to work at it after you stop neather will your sister might want to check to see if the ...
2005 KX250F Idle problem. Carb has been cleaned... 2005 KX250F Idle problem.carb has been cleaned and set to stock settings. try doing a idle drop procedure. this will help out alot.
2004 kx250f it starts but then locks up. if i back the motor up by hand i can kick start it again. looked at the cam chain tensioner and it seems fine but cant find anything wrong. lost at this point.
Kx250f 2004 and it wont kick start when it is cold but i can clutch start it when cold, but when it is hot it starts no problem with the kick starter low speed carb settings need ajusment also look at
i got a 2004 kx250f, has a rebuilt motor with new piston,rings,cams,timing chain, it has spark and getting fuel, its in time but wont start? need more info does it hit at all
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions