Questions & Answers for: 2003 pontiac grand crank

Question about 2003 Grand Am

2 Answers

...2003 pontiac grande am se and I drove in it for a week with the low oil light on. The car cut off while I was driving and now it won't crank. It knocked the first time I tried to crank it but now Its ...

Ad

...2003 pontiac grand prix Depends on motor size , and which crank sensor? .7 hrs to 1.3 hrs depending on application. At an $85 per hour rate that would be $60 - $110 depending. If u can do it urself ...

Ad

...2003 pontiac grand am 4 times and it keeps going out...what could be causing this issue this requires a RE-LEARN procedure. The delaer is the only one who performs this. Is your SES light still

Question about 2003 Grand Prix

1 Answer

2003 pontiac grand prix i have changed spark plugs,wires,coils all three and my crank postion sensor. I am still getting a multiple misfires code, i dont know what the problem my be. it was cuttin off

2003 pontiac grand am will not crank over no click from selinoid nothing,new battery and starter is good also ignition switch has been checked good. Hi. Since starter and ignition switch has been ...

Question about 2003 Grand Am

1 Answer

...2003 pontiac grand am Had same problem with two different 03 Grand Ams with 3.4 engines. Had to replace and reprogram the PCM on both vehicles. Both are now working fine. The repair is not something ...

...2003 pontiac grand am Will the crank pulley have to be pulled in order to get to the sensor? If you need to replace that sensor than yes you need to pull the crank pulley. There are two crank sensors ...

2003 Pontiac Grand Am It should be in the main fuze box under the hood or in a separate box for relays. Why do you ask? Have you got a startup problem? When you crank, you should, or a helper, be able

Question about 2003 Grand Am

1 Answer

my pontiac grand am do not start ...need more information, does it make a sound, do the lights turn on, does it crank....

Question about 2003 Grand Am

1 Answer

2003 GRAND AM TIMING MARK 3.4 v6 Timing is controlled by the ECM and is non adjustable. If you are referring to the timing marks on the cam and crank pulleys for timing belt installation, please reply

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...