Questions & Answers for: 2003 focus headlights

...focus lights hi i cant work out how to use my lights for night time driving i can only work out how to have fog lights and side lights how do i have it for normal night driving as there is no option ...

...2003 ford focus, had it replaced, but now the light is aiming much higher than the driver side, how can I fix this problem. first off if you paid to have it replaced then i would take it back to them ...

...2003 ford focus, the passenger headlight went out, had it replaced and now the light is aiming much higher than the driver's side. How can I adjust it. Make sure the bulb was put in correctly and ...

...focus, my back headlights don't work, my reverse, brake, and indicator lights all work fine. The lights on my dash i.e. petrol gage, speedometer don't work. How do i fix it.? Check your fuse box. ...

...focus 1.6 xl 2003, full beam is always on. How can I turn full beam off? the hi-lo beam switch may be bad. i dont think you can turn it off unless you keep playing with the switch and get them to go ...

...battery cable. I made a video on a repair I had to make to my headlight switch and it will show you how to remove it. It's on my 2003 ford focus but it should be almost if not exactly the

...Focus 2003 with a 2.0 ZETEC-E engine. The other day I was driving at night and all of a sudden the headlights went out. I continued driving and then they went on again only to, after a little while, ...

2003 Ford Focus with a single CD/radio (1S4F-18C838-BA). When I turn on the headlights, the radio display light goes off. I noticed the connector has space for 7 pins, but only six have wiring in them

...2003 ford focus for the headlights Dim lights don't work . Check the owner's manual for all fuse and relay locations, but there is no such relay for the headlights, the dimmer switch is likely the ...

2003 ford focus no taillights,, no license plate light all fuses are good. Does any one know how to test the head light switch? Before testing the headlight switch, check for a defective general ...