Questions & Answers for: 2002 mustang gt fuel pump

...problems is the fuel pump in the tank on a 2002 mustang 3.8 Yes, the fuel pump is inside the tank. Use a jack and a piece of wood when you lower the tank down, it'll save you from awkward

2002 mustang gt timing and air/fuel i have a 2002 mustang gt with 75mm tb and plenum, xe274h comp cams, headers, exhaust, etc.. trying to get timing and air/fuel dialed in right.. right now air/fuel ...

...2002 mustang gt dtc 1230 1233 codes , no bad fuses or relays, no fuel pressure at rails new pumps.. If you are not getting fuel pressure to the rails then you have an electrical problem such as a ...

2002 Mustang GT.No fuel pressure at the Schroeder valve.How can I confirm it is my fuel pump? The pump assembly is expensive & I want to confirm it is the pump. You can check for power at the ...

2002 mustang GT serpentine routing need to know the 2002 mustang GT serpentine routing Hope this helps ya.. Cobra... :-) Item Part Number Description 1 10344 Generator pulley 2 8620 Drive belt 3 8A528

...mustang gt convertible.. Out of the blue my fuel pump stopped running. Got a new one..it started up ran great..then we shut the car off. Tried starting it again..fuel pump never cut on. This may be a ...

...mustang gt 5.0 @ According to the information that I'm finding, the fuel pump relay on '94 Mustangs is part of the Constant Control Relay Module (CCRM). According to mustang-tech.org, the CCRM is the ...

...2002 ford mustang gt wont start i have replace the ignition switch anf the starter and all fuses are good under the hood and dash Does the engine crank ? If so do you smell gas ? If you smell gas you ...

...2002 Mustang GT. I t has a 4.6 motor and Automatic ******. Car is mostly stock with aftermarket exhaust, gears and a cold air intake. The car has always been reliable and the other day I was driving ...

...Mustang GT. The fuel pump is not running? Engine cranks. Fuel pump fuse is good. Changed CCRM, ECU (PCM), checked inertia switch, but Fuel Pump still doesn't run. Hot started the pump by jumper wires ...