Questions & Answers for: 2000 silverado o2 sensor bank

2000 chevy silverado 2500 with a 6.0 motor the service engin soon light comes on for awhile and then it goes out ,and then back on.the engin keeps cutting out,almost like a missfire i was told by a ...

Ad

Question about 2000 Silverado

1 Answer

2000 chevy runs rough changed fuel pump fuel filter o2 sensors o2 sensors still show bank 1 #1 lean bank 2 #1 lean will run 200 miles i will shut it off do what i have to do start it up and go 3 to 4 ...

Ad

...then postion 1 is closer to the eninge, and postion 2 is further away. SO... Bank 2 postions 2 would be the passenger side rear o2 sensor (that was just an exsample of what a code could be) Good

Question about 2000 Silverado

2 Answers

...O2 sensor located above the catalytic converter before replacing the evaporator purge canister. start by changing the O2 sensor on the passenger side of the engine, and also change the air filter and ...

Question about 2000 Silverado 1500

2 Answers

...O2 sensor locations, bank ! is the drivers side exhaust bank two is passenger side, ok,now the other part is like this, sensor 1 is the O2 in font of converter,sensor 2 is the O2 after the converter. ...

...2000 SILVERADO PU AND THE CHECK ENGINE LIGHT CAME ON I TOOK AND HAD THE CODE READ P0060 SENSOR 2 BANK 2 OUT SO I REPLACED THE LIGHT STAYS ON EVEN AFTER IT WAS RESET AND SAME CODE COMES UP Did you ...

Question about 2000 Silverado 1500

1 Answer

I need to know on bank 1 which o2 sensor is sensor 2 Hi, sensor 2 is behind the catalytic converter. Bank 1 is on the driver's side.

Question about 1998 Grand Marquis

1 Answer

...2000 silverado There is 4 of them, one behind each of the exhaust manifolds. Driver side being bank 1 sensor1, passenger side being bank 2 sensor1. And one behind each of the catalytic converters. ...

2000 chevy silverado p0171 ; p0174; p0300 Sounds like you have a serious vacum leak.; DTC 0174 and 0174 are lean conditions on bank 1 and bank 2, 0300 is random misfire. The only thing I can think of ...

o2 sensor bank 1 sensor 1, now reading "Circuit Low Voltage Bank 1 Sensor 1" and P0154 on Bank 2 Sensor 1. Live readouts on both show avg of .48V. What is wrong? Lets examine your readings first. Code

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...