2000 jeep grand cherokee limited starts in 3rd gear My 2000 jeep grand cherokee limited starts in 3 rd gear. I have to manual shift it to drive. The overdrive button does not seem to work also. could ...
...jeep grand cherokee p1756 2002 wj jeep grand cherokee laredo 4l how do i fix my transmission with error p1756. it also often takes off in 3rd The governor pressure sensor is the most likley cause ...
...transmission is good, ive replaced the computer, and the speed sensor module. does anyone have any idea what the problem might be? if it helps my cars a 4.6 liter with a v8. thanks! the transmission ...
2000 jeep cherokee laredo - Check engine light keeps going on and off at different times. Sometimes wont go into overdrive gear (automatic. sometimes hops back and forth into different gears - what ...
...2000 grand cherokee limited 4.0? 4.0L The Crankshaft Position Sensor (CKP) is mounted to the transmission bellhousing at the left/rear side of the engine block. Engine speed and crankshaft position ...
...cherokee Hi, DTC P1727 - 4c hydraulic pressure switch circuit- this is set if pressure switch doesnt close on command from the TCM(transmission control module) There are wide ranging possible causes: ...
...cherokee sport that is running a few engine codes and i have a code scanner but no book to look the code up... mine are p1281,p0700,p1694 P1281Engine Is Cold Too Long P1694No CCD Messages Received ...
...Sensor (CKP) is mounted to the transmission bellhousing at the left/rear side of the engine block. Engine speed and crankshaft position are provided through the crankshaft position sensor. The sensor ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
