Questions & Answers for: 1 5v Audio Players & Recorders

Question about Computers & Internet

1 Answer

...motherboard connector Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 3.3V 3.3V Gnd 5V Gnd 5V Gnd P_OK 5VSB 12V Oran Oran Blk Red Blk Red Blk Gray Purp Yell Oran Blue Blk Green Blk

Ad

Question about KT4V (MS-6712) Motherboard

2 Answers

MSI kt4v minus 5v (-5v) Hi. My system is about 5 yrs old and recently I can not boot it. When I go into bios, PC Health Status the minus 5v shows None (other voltages look normal). I have replaced the

Ad

Question about KT4V (MS-6712) Motherboard

2 Answers

...power supplies & their ratings are as follows, 300W 350W --------- ---------- +3.3V 14A +3.3V 25A +5V 30A +5V 25A +12V 15A +12V 15A -5V 0.8A -5V 6.5A -12V 0.5A -12V 6.8A +5vSB 2A +5v SB ...

Question about KT4V (MS-6712) Motherboard

1 Answer

...using an external HDD adapter is that BOTH of the two live wires (the other two being ground) are 5V. All of the external HDD adapters i've seen have one 5V and one 12V. So my question is this: ...

Question about 1998 Ram 1500 4WD

2 Answers

...at a time. I found this: http://www.obd-codes.com/forums/viewtopic.php?t=724 Problem 1 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft ...

...Body/Chassis Electrical, Emissions/PCM/Fuel, Engine Electrical Codes: N/A Problem 1 of 6: The 5v power supply from the Powertrain Control Module (PCM) is shorted due to a shorted Crankshaft ...

Question about SmartPower 2 SP400 400-Watt Power Supply

1 Answer

...go about checking the output with a VOM? Which leads (colors) should be what voltage? Thanks. red- +5v yellow- +12v orange - +3.3 black- 0v blue- -12v white - -5v green - ps-on(+5v) gray- power ...

Question about SmartPower 2 SP400 400-Watt Power Supply

1 Answer

...USB or car chargers for your iPhone. A USB charger will always have an output of 5 volt (5V) but the current must be minimum 1 ampere or 1000 mili Ampere (1A or 1000mA). When you see a ...

Question about SmartPower 2 SP400 400-Watt Power Supply

1 Answer

prolink h5201 the required voltag pro my prolink modem is 5V AC, but my adapter is 5V DC... is it okay to use my 5V DC? No. You must use a 5V ac adapter/power supply. But are you certain that you need

I need a new power adapter - 7.5v 0.8A,for a Sangean DCR-9 clock radio. Where can I get one in Melbourne Australia? Don't know where you can get it in Australia but you can buy it on some website AC ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...