Questions & Answers for: 1999 silverado brake module

No brake lights Everything is working fine except the rear brake lights, third brake light works. Both of the rear modules were replaced a few months ago, good clean contacts on both sides. Thinking ...

...brake fluid pump" runs constantly. After a local shop diagnosis, I was told that the relay in the module is defective. Estimated cost of new module $ 1,000.00. Can this module be repaired ? Is a ...

silverado and i had to replace the module on top of the abs pump. it was not easy i had to disconnect all the brake lines and drop the abs pump but i saved myself about 200 by doing it myself and have

...1999 chevy silverado with a 4.8 LITER.. my brakes were fine until i broke a line at the frnt passenger side. i lost most of the fluid..i repaired thr line and bled the sytem numerous times.. i only ...

the lighs abs brakes come on MOST LIKELY YOU HAVE A BAD WHEEL SPEED SENSOR. YOU MUST TAKE IT TO A SHOP AND HAVE THEM SCAN IT. Also could be the ABS module

1999 1500 ls abs and brake light on at same time then off just sometime WHEN YOU SEE BOTH LIGHTS AT THE SAME TIME YOU ARE HAVING BRAKE FAILURE EITHER MASTER CYLINDER FAILING OR ABS BRAKE MODULATOR ...

...silverado 4x4 1500, changed brake light switch, changed tali light boards, check ground, Third brake light comes on, has aftermarket trailer wires, brake light indicator comes on the module?????? DID ...

I have bled the brakes and still do not have proper brake pedal Lines were corroded and broken and leaking. They were changed. Unsure if there is a bleeder valve on teh abd control modules Check your ...

...1999 Chevy Silverado the abs light and brake light stay on and brake pedal goes to the floor is the abs module bad? You have a defective master cylinder. I've seen ABS sensors get clogged up and not ...

brake light comes on and sometimes the cruise control will cut off only when the ac fan is turned on You must have the systems control module scanned for faults that will explain this. Guessing wastes