...gmc k1500 with 5.7 vortec and my truck did the same thing to me 4 times.So the first time it acted up,after running good all day, I checked the gas gsuge and it read between 1/4 tank and empty.So I ...
...GMC Yukon with 5.7L gas engine. No trouble codes as per my scanner. When engine is ran for about 30-35 minutes it slowly begins to cut out at 3000 +Rpms and if you keep driving it will eventually not ...
...engine. Gages should read as follows: Oil pressure 5 to 10 psi (34 to 69 kPa) at idle; Water Temp gage below 230 degrees (110 C). · Check engine oil level (Para 2-11) if OIL PRESS gage indicates ...
...1999 mazda protege Hi, HOW TO INSPECT EGR VALVE Before attempting to troubleshoot or repair a suspected exhaust gas recirculation (EGR) system on a vehicle, the following conditions should be checked ...
...5 quarts of fluid. Now remove the remaining bolts, and the pan and gasket.Clean all traces of gasket and sealant from the mating surface of the transmission. Drain the remaining fluid from he ...
Question about 1999 Jimmy
GMC S15 and Sonoma Stalling/Dying Problems - Car ... forums.edmunds.com > Chevrolet > Chevrolet S-10 Dec 15, 2007 - 30 posts - ?22 authors Learn more about Chevrolet S-10 at the Edmunds.com Car Forums
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions