Questions & Answers for: 1997 gmc jimmy ignition wiring

1997 Jimmy wont start no one can figure out the problem . replaced all the sensors, fuel pump, battery,and also has a new engine and distributer did you check the ignition control module? Try the ...

1997 GMC Jimmy: power windows, power locks, and 1997 GMC Jimmy: power windows, power locks, and ac don't work when the ABS light is lit. Check the wires that go to your wheels for the ABS. They are ...

...1997 GMC Jimmy wont start--pulled starter bench tested ok battery tested good check your ignition did one of these before changed 3 starters before finding out it was ignition switch not making ...

...gmc jimmy service engine light flashes while running and idles rough you probably have a miss fire, when it flash it tell you that you do have a problem and you need to get imediate attention. more ...

1997 gmc jimmy is misfiring, having trouble starting I just changed spark plugs and wires distributor/cap/rotor, alternator and battery, ignition module, throttle sensor Sounds like you have a couple ...

how many wires go to the starter on a 97 jimmy 2 wires,one to positive battery cable,other one to ignition.

...gmc jimmy Which e"xact" wire is the ignition timing advance wire located on the 1994 GMC Jimmy, (to ("disable" the timing advance) for setting the ignition timing on this truck) Its on the dist. on ...

...1997 GMC Jimmy and upon completion I charged the battery for a test fire. As soon as I installed the battery, the headlights came on and gauges on dash going crazy meanwhile the key isn't even in the ...

...1997 GMC Jimmy. Once you start it, the ignition alarm never cuts off. Is it a duse? There is a small access port directly beneath the ignition. Is this how you access the repair? Nothing the ignition ...

1997 GMC Jimmy ignition switch. Can anyone show me a picture of where this connector on the ignition switch goes? Boy that sure looks like the steering column harness that hooks up to your ...