Questions & Answers for: 1997 geo metro 4 cyl

geo metro 4 cyl. 5 spd - trouble code 134 No PS or AC on this car. your o2 sensor is defective or came loose Check your belts: the A/C and PS are on the same ACC belt (separate from the alternator and

GEO METRO WE NEED TO KNOW THE FIRING ORDER ON MY 1992 GEO METRO SO WE CAN SET IT PROPERLY The firing order is 1-3-2, distrubtor rotates counter clockwise. looking at engine from front of vehicle cyl.

Geo Metro 4 cyl.? Starter solenoid not getting 12 volts to engage, seems as though it getting enough to click but not engage. I have one, what do you need to know? Have you checked the battery? Should

...geo metro 4 cyl 1.3 how do you get to the starter to change it? can you get to it from underneath or do you have to pull a wheel and one of the drive axels to get to it? According to the tech maual, ...

...geo metro that my son just bought and was runing fine untill today. The starter turns over but dosent want to catch. If it does catch it stalls out. Any sugestions? The starter has died of old age - ...

Need firing order diagram for 1997 Geo Metro Lsi 1.3 liter 4 cilinder 1997 Geo Metro 1.3 liter L4 VIN "9" Hope helps. (remember rated and comment this).

...Geo jerks under acceleration in every gear They come with a 3 or 4 cyl engine, but either way it would not take much to make it run rough.Usually a miss-fire under load is ignition related.Have you ...

1997 Chevrolet GEO METRO LSI makes a whirring grinding noise and doesn't fire Replaced the waterpump and it makes a whirring grinding noise and doesn't fire when the ignition key is turned. It doesn't

...geo metro I found this at 1998 Geo Metro Fuel Filter 1998 Geo Metro 4 Cyl Two Wheel Drive : under vehicle, driver side, below seating area, front of fuel tank, mounted on chassis in fuel line. . . . ...

...1997 geo metro camshaft position sensor 1993 Geo Metro Camshaft Position Sensor Unraveled ... ? 5:18 www.youtube.com/watch?v=XXA1yFePM4w Apr 8, 2015 - Uploaded by Jeff Dean This is Part One of a ...