Questions & Answers for: 1997 buick lesabre wiring code

...buick i get a code that reads system to lean bank 1 what should i check the maf sensor gas cap fuel filter if the maf is there a way to test it without buying new one first i get code po171 system to ...

Ad

Question about 1997 LeSabre

1 Answer

1997 buick lesabre i bought a ciolpack for a 1996 buick lesabre, i didnt realize the car was a 1997. ( i just bought it) so my question is will the coilpack be the same or do i need to exchange it? ...

Ad

speedometer doesnt work there are no codes is it speedometer doesnt work there are no codes is it the cluster or a wire is this a common problem Send cluster off to have it checked. Model electronics ...

replaced the water pump, now the car idels rough like plug wires crossed. the only electical unplud was the alt. and the battery. no check eng light but i get a p0300 code which is mult miss fire ...

Question about 1997 LeSabre

1 Answer

1997 buick lasaber into a 1997 Grand jeep Cherake the radio has cd/tape/am/fm/ need to know what coler wire goes where. serial man.no. stock no. is 16249434 Prod.ID PKG. No. is 2001 numbers below code

Question about 1997 LeSabre

1 Answer

1997 buick lesabre reads no codes . Engine turns ove,r car wont start. why? could it be a crankshaft sensor or a camshaft sensor 1st you need to see if its spark or gas related.spraying carb cleaner ...

Question about 1997 LeSabre

1 Answer

code B1041 B1041 Fault in CAN communication with control unit Traction systems storedCheck the gearbox control unit for oil contamination. The electrical plug on the gearbox car leak into the wiring ...

Question about 1997 LeSabre

1 Answer

P0500 code on 1997 buick lesabre I have new wires and plugs speed sensor try to reset,check connection,replace.

Question about 1997 LeSabre

1 Answer

1997 Buick LeSabre Custom I am helping a friend who recently bought a 1997 Buick LeSabre Custom. When she brought it to me the car was running rough and had a hard time running. I checked the codes ...

...1997 buick lesabre 3.8 codes read as follows, P0171 first, so I changed plugs , wires , coil packs ,map sensor and sensor valve. Next codes read P0171 , P0300, P1406. Cleaned Egr valve still has a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...