Questions & Answers for: 1996 jeep grand cherokee computer

1996 Jeep Grand Cherokee - Will Not Start or Run 1996 Jeep Grand Cherokee Laredo, no start, engine shuts down within 2 or 3 seconds, this has only happened after we replaced the transmission from ...

1996 Jeep Grand Cherokee Converted to 5 speed -- engine light on 1996 Jeep Grand Cherokee was converted from automatic to a 5 speed and runs well. Engine light is on however as computer is looking for

...Jeep Grand Cherokee -driver door shows ajar, dome light is on ' 96 Jeep Grand Cherokee -driver door shows ajar on computer screen, dome light is on and off and alarm sounds at times. Seems like the ...

...1996 jeep grand cherokee limited taht will turn over but will not start and the gauges on dash will not work like the fuel temp ext i have no spark to plugs and i had a friend put computer on it to ...

where is the computer on a 1996 jeep grand cherokee laredo Powertrain Control Module: Locations The Powertrain Control Module (PCM) is located in the right-rear side of the engine compartment.

1996 Jeep Grand Cherokee 4.0L engine work i have a 1993 Jeep Grand Cherokee and i need a new engine. Will a 1996 Jeep Grand Cherokee 4.0L engine work? Computer hookup should be the same and physically

...1996 jeep grand cherokee straight 6 and i am swapping the engine out for a 94 jeep grand cherokee straight 6 also was wondering if the computer can stay and the dificultys behind this project If you ...

...1996 Jeep Grand Cherokee so, I replaced it as well as the battery. $350 later it still just cranks and cranks. It doesn't even attempt to start, just turns over. The computer was already ...

how do i do the timing on a 1996 jeep grand cherokee laredo The timing is contolled by the PCM (computer) and is not adjustable.

...jeep cherokee with 1996 engine is putting a 96 grand cherokee engine into a 1993 jeep cherokee possible. Yes it can be done as long as all the parts for 96 are used including the iring harness and ...