Questions & Answers for: 1991 lexus ls400 change rear

Question about 1991 LS 400

4 Answers

...have a clue how to remove whatever portion of the dash needs to come out ?? How tp fix Dashboard lights on a Lexus Ls400 1991, not working. Contact Jim at

Ad

...1991 Lexus LS400 simply pop open the hood and rite above the headlights r 2 medium nice size screws,2 at top,one at bottom,but n order to take the head light out u first have 2 remove da first light ...

Ad

Question about 1991 LS 400

1 Answer

...1991 Lexus LS400 open the hood then look down ont he side that is blown there should be a black rubber boot covering the light look for the wiring then slide the boot back release the sension clasp ...

...light bulb(s) in a 1996 LS400 Lexus? THREW THE TRUNK RIGHT UNDER WHERE THE LIGHT IS MOUNTED THERE SHOULD BE 2 WIRES GRAB AND TURN THE PLUG AT THE END OF THE WIRE THE PLUG WITH THE BULB SHOULD POP ...

Question about 1991 LS 400

1 Answer

Lexus LS400 back taillight out Yes I have a lexus LS400 and my back tail light is out I would like to know what fuse to check It's the top right kick panel fuse and should be a 15 amp.

lexus ls400 1991 stopped firing up. It turns over but no go. Everything else seems to be working fine. Is there a commom problem that causes this? check/change the crank sensor and check your ignition

...1991 lexus ls400 remove rear seat then remove cover in the trunk, you will see a cover remove thatcover and remove 8 bolts holding fuelpump in tank,also dissconnect connector to fuelpump with bolts ...

...Lexus tail light to ensure it is working. need to make sure your test on bulbs. a bulb in tail light has two contacts,one for parking and the other one is for stopping. if the prove fails need to ...

...1991 Lexus ls400. I checked all fuses,bulbs, and Brake switch and they are fine. Help? Brake light switch was replaced and didn't solve problem. Also the brake lock out system works fine. All ...

1991 lexus ls400 trac light comes on light goes out when shutting off engine and comes back on after about 50 miles Check to make sure that none of the wire harnesses are touching the exhaust manifold

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...