Questions & Answers for: Oldsmobile Silhouette 1991 buick regal starts stalls

Ad

...up to operating temp. I told my dad this, but he won't listen. So, is there an "idiot" light that comes on for this on this car? had same problem with 99 buick regal 3800-v6 and it was the ...

Ad

need to know where the timing marks are on cam and cranck for 1991 oldsmobile sillouetechanging the timing chain.how do i line up the marks? Finding the timing marks is simple, it is an impression (a ...

Ad

1990 Olds silhouette at highway speeds engine stalls. shift to nuetral, wait for engine rotation to stop. restart and shift back to drive. engine runs normally for 1/2 to 2 miles then stalls again. ...

Question about 1992 Silhouette

1 Answer

Stalled at intersection. Started again, but when I tried to shift into drive it would stall. It fired up 5 more times. But kept on dying when I tried to shift into drive. Now it just wyinds out ...

Question about 2000 Silhouette

2 Answers

security light 2000 silouhette Does it start and run? If so i would check the yellow wire going to the passlock in the ignition switch, If it doesn't then you may have a faulty pass lock system. you ...

Question about 1998 Silhouette

1 Answer

my 1998 oldsmobile silhouette sometimes just cuts off sitting in traffic, any ideas/solutions??? Here are 3 very common causes for an engine stalling. 1. Old air filter, ( if it's old it restricts the

Buick 2004-2007 Rainier 1994-2005 Century 1993-2004 Regal 1982-1999 LeSabre 1991-1996 Park Avenue / Ultra 1994-1996 Roadmaster 1991-1996 Roadmaster Estate Wagon 1982-1999 Riviera 1988-1991 Reatta 1996

Buick 2004-2007 Rainier 1994-2005 Century 1993-2004 Regal 1982-1999 LeSabre 1991-1996 Park Avenue / Ultra 1994-1996 Roadmaster 1991-1996 Roadmaster Estate Wagon 1982-1999 Riviera 1988-1991 Reatta 1996

2004 does a false start then will not start for at least 10 to 20 minutes. It will crank but not start. cold start , stall. so when it does start does car run perfect.? the first time any car has ...

...starts an runs it's not the crank sensor behind the crankshaft pulley . I would check grounds. RPM's jumping is normal (Kind of) when stalling. Speedo is not.Opening the throttle to start, you might ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...