I think gas is not getting to your fuel rail. Could be the fuel pump. To access it you will have to remove you rear seat and take off an oval shaped plate. There you can remove it and replace the pump
...fuel pump failure before going out and just buying the part The best way would be to use a fuel pressure gauge to read the fuel pressure while the engine was running, but you can also try this, when ...
1990 4Runner 3.0 L engine won't hold idle wants to stall no power. Replaced Mass air flow valve sensor replaced fuel pump distributor cap and rotor plugs. No fuel pressure with ignition in on position
no power to fuel pump No power to fuel pump. Fuel pump works when isolated. Where do I look for the answer to no power? Check the fuel pump relay in the relay box under the hood.
Getting no power to the fuel pump. Any ideas?? Have you checked the fuse and relay switch?
...EFI. Theres also a relay for the fuel pump there, its a round metal item. In truck cab on driver side near left foot is fuse box, EFI fuse in there also. This on a 4runner so you may be
...1990-toyota-pickup-circuit-open-relay-location-300489/ https://www.yotatech.com/forums/f116/location-circuit-opening-relay-94-4runner-132443/ ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions