Question about 1988 Samurai
...idle i have to put it in first and go and if i accelerate ill stall out, it accelerates on it's own i use the break to control speed and just shift throuth the gears as it accelerates on its own, my ...
...air and fuel, plugs, wires, rotory cap and button. Timing is correct. Egr seems fine model does not have pcv do to the lack of cold idle choke in fact never had pcv. Did the idle speed screw which ...
...1990 suzuki samurai, engine turns over but no sdpark. changed coil and ignition module. still no spark. what next? Try checking the contacts between the rotor button and the distributor cap, ...
when running it is running at very high idle about 3000 rpm what could be the problem bound acc cable vacuum leak idle control motor Idle Up Control Valve check this first
...stalled as soon as it dropped back to idling speed. Could it be a blocked idle jet and if so is it easy to check/fix? Thanks Fix your car right away by clicking the link I attached 1987 Suzuki ...
...idle mixture of the carburetor First ck for a vacuum leak listen for a small slight hisssing noise. and ck pcv hose and valve. the normal rpm is 750 to 850 from the front of the vehicle look on the ...
...kept throttling Sounds like you have a air flow problem not real familiar with the suzuki but it may have a air flow adjustment or either a set screw for idle control to maby idle it up just a
...started throlte stuck open when started Have you looked into the throttle body to see if the throttle plate is actually open, or does it have a vac leak or a problem with the idle air control valve
...for the easy solution download the pdf ...
Suzuki Samurai is 4 to 4.5 psi. 1.3L 8V and 1.0L 6V TBI Key on: 22.7 - 29.9psi Idling: 12.8 - 20.0psi. Samurai and Sidekick TBI Key on: 34.1 - 39.8psi Idling: 24.2 - 29.9psi Sidekick MPI Key on: 35.6
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions