Questions & Answers for: 1988 mazda b2200 clutch slave

clutch adjustment on 1991 Mazda B220 pickup I am running out of clutch pedal. How and where do I make an adjustment to the clutch? Check the fluid, check for leaks, if there is replace the cylinder or

Ad

...Mazda B2200 PU. Clutch sticks to the floor and if held down eventually allows disk to engage. Can pull it up with side of foot before tries to engage, then works again. No noise from throw-out or ...

Ad

clutch pedal on a Mazda B series truck Stuck clutch pedal on a 1991 Mazda B series truck. The clutch pedal will not return from it's depressed position...the dot 3 fluid level in the master cylinder o

...clutch slave cylinder, keeps losing resistance on clutch pedal, repeatedly bled to get pressure again , how do I fix this problem ? Replace the clutch slave cylinder and re-bleed the system. It's ...

Question about 1988 B2200

1 Answer

...clutch cable, if it has one if it has a slave cylinder check the fluid usually located next to the brakes master cylinder,if fluid is low add some brake fluid and pump it up if it starts to work you ...

mazda e2200 clutch repair: feels like I still have some kind of pedal springback, but without much force. No clutch at all. I assume it is hydraulic, but the only reservoir I see is for the brakes. ...

Question about 1988 B2200

2 Answers

...of fluid and there does not appear to be a leak you may need the clutch replaced if the clutch slave cylinder and master is working. CLUTCH GOING TO THE FLOOR COULD BE BROKEN RELEASE BEARING OR

Question about 1988 B2200

2 Answers

1990 mazda b2200 clutch sticks to floor Check the fluid in the hydraulic clutch resevoir. Change the clutch master cylinder, if still sticks there will be need to also change the slave cylinder.

Question about 1988 B2200

1 Answer

...slave (gearbox) check both, get someone to push clutch while looking at the fluid in the master if it drops it's still good. do same gain and watch the slave if it extends and moves the lever ...

Question about 1988 B2200

1 Answer

Mazda B 2200 will not go in gear? Truck will not go in gear? hydraulic clutch system
if the clutch master cylinder is full of brake fluid
master or slave is by passing

shift ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...