clutch goes to floor without engaging how do you bleed a hydrolic clutch on a 1988 Honda Prelude i had that car.... when that happened to mine, they replaced the master cylinder
1988 honda prelude 2.0s when im driving the engine cuts out and when i get it running it runs at low rpm timing belt jumped?
...to the floor on 1988 HONDA prelude clutch goes to the floor and doesn't come back up. It won't shift either. either your one of the 2 punps on could be bad usually the master slay cinlinder cluch ...
1988 Honda Prelude won't start I have an 1988 prelude and whenever I park it on a hill with the front of the car pointing up. It will not start. If I bring the car down to a level area and let it sit ...
I need to know what size of tires came on a 1988 honda prelude "stock tires" No sticker on driver or passenger door or door post? I'm showing 2 stock options, 185/70/13 & 195/60/14.
1988 honda prelude won't start the ecu is giving me a code 6 which is ect sensor will that keep the car from running it has pgm-fi-system change the sensor
...1988 honda prelude yeasterday. The owner before me said i need to seal the sunroof. So what should i use and how would i do this? I still want the sun roof to work. go to a Honda Dealership and ask ...
the entire manual from www.pdftown.com Here is the link to the shop manual for the 88 prelude that I used to do my Cam Belt. http://pdftown.com/Honda-Prelude-1988-Service-Manual.html Hope this helps..
Question about 1988 Prelude
1988 honda prelude si manual i don't know were to put the transmissiion fuel for my 1988 honda prelude dont put any fuel in any transmission If your looking at your engine bay It's between the battery
Usually answered in minutes!