Questions & Answers for: Chevrolet Corvette 1975

brakes 1975 corvette, changed pads now im not getting any fluid out when i bleed the, can you help? Check to make sure your bleeder valve isn't plugged. Just remove it completely and clean it with ...

ignition control mod. and no luck. I checked the grounds but might have missed something. this is a 1975 stingray w/ a 5.7 350 and electronic (HEI) ignition ever seen this happen before ? can you help

need a fuse panel diagram for 1975 corvette Go to one of the major Corvette club of America web sites , register and ask. Someone is bound to have this.

no tail lights on 1975 corvette stingray and i have replaced bulbs most likely the ground is weak. trace the ground wire that feeds the tail lights back to the frame and clean up the connection. one ...

1975 corvette both power windows quit is this possibly a fuse check ur relays under the hood

dash lights don`t work on a 1975 corvette Your dash light...(instrument panel fuse is blown) or the headlight switch is bad...If you need any parts...the internet for corvettes is awesome. Hope this ...

is power always on at fuse box? It seems I only have power to half of the fuse box in my 1975 corvette some of the fuse will only have power when that circuit is activated.you may have to turn on ...

1975 corvette how to fix the latch on the back of my seat

How do I balance or adjust the power steering control valve on a 1975 Corvette? Turned the adjustment nut to the left and right. The power steering wheel is now at an angle when I drive. Do the two ...