Questions & Answers for: Oldsmobile Cutlass 1970

what is the firing order for a cutlass 1970, 350 ? Maybe a diagram? I could not find anything for your exact year but this should work, firing orders for Olds V8 engines never changed. ...

...current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1970?71 Chevrolet?built 250, Inline-6 Engine firing order: 1?4?2?6?3?5 Distributor rotation: ...

I need the firing order for a 350 Oldsmobile 1-8-4-3-6-5-7-2

I have a 1970 cutlass with a hurst shifter it's a automatic I can switch the shifter through park, r, n, d, 2, 1, but it won't come out of park unless I go under the car and disconnect the linkage Hi ...

detailed drawing of the power steering assembly and brackets If you need detailed specs, then you need to find an old body shop that's been here for ages. They might have your specs. A good ...

why does my a/c blower only work on high speed. switch works and resistor good and get power through it. there is no resistor for high speed fan as it is full 12 volts the slower speeds are resistor ...

Turn signals not working relay or buzz blown

1970 olds cutlass turn signals not working Hazards work but signal lights don't heeelllppp Most likely it is the signal cam in the column. I had one in a 1970 Torino about 35 years ago do the same ...

...- AutoZone www.autozone.com/...Cutlass...1987.../Rocker-Arms/_/P-0900... AutoZoneGM Cutlass RWD 1970-1987 Repair Guide ... To remove the rocker arms from the shaft, the nylon arm retainers must