Questions & Answers for: Chevrolet Blazer 12v fail

Question about 1996 Blazer

1 Answer

...If you see the light blink Good. Then make sure the PINK wire wire going going in the module has 12V KEY ON and also check the two wires inside the distributor that come from the pick-up unit make ...

Ad

...and the condition of cap and rotor plugs and wires. The pcm fuse and ign fuse must be suppling 12v to the system so check for 12v at the coil, icm, and cps. check ground, power and ...

Ad

...93 blazer suddenly quit working, changed the fuse and master switch still nothing At this point a 12v test lamp probe is very handy.Remove inner door trim panel and gain access of the window ...

...fail with advanced age or due to poor maintenace as well.) With the engine running you should measure 14.5 VDC or so at the battery (using a Voltmeter). If it is 12V or less the alternator is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...