Questions & Answers for: Vizio 12v 5 pin relay

5 & 12v supply you should be able to trace back using a dmm and see if you have both of those voltages present... The lead coming from the smps to the y-sus board is a good start. On a Vizio I believe

...IC 32 small 8 pin surface mount near top of Main Board and remove. Short pin 2 to pin 5. (pin 5 through 8 are together and pin 2 and 4 are together) You will need a good TV Tech to do this for

...but need the corrrect voltages on cn2/cn3 A and B pins out from pwr brd. thanks is 3,3v,5v and 12v power ...

...5 pin DINS to the television. I would like to use one of the two speakers as my "center" speaker for the surround sound. Is there a female connector available to accomplish this? Thanks ...

...0 DCV 2: 0 DCV 3: 0 DCV 4: 0 DCV 5: 0 DCV Connector: BL - ON/OFF Bright: 0 DCV 5v: 0 5v: 0 12v: 0 12v: 0 Standby: 0-183 DCV Jumped all over the place. Thank you for your time. Well time for a new

5 volts. I am trying to test the 12v's and the 24v's but I don't know what two pins I need to jump first. Can you assist me telling me what to jump in order to test the: 12v to grounds and the: 24v to

...to the capacitors, fets or any other components. The fuse is good. There is no DCV at the 5V, 12V and 24V pins on the connector. I tried to measure with the connectors installed and

...pin on the main board is also reading 5v. The strange thing is that the pins on the same connector that are supposed to be 12v ALL read 19v instead. Could something on the power board be busted and ...

...12V at the 8-pin connector, but not 5V. I figured the power board was bad probably wrong and installed a replacement board, which did not change any of this. With the cables attached to the ...

screen with no sound and no symbol. Changed main board and t-con. Power bd has 2 12v pins. 11.5 on one and nothing on other and goes to main bd You have a bad panel, set isn't repairable unfortunately