...signal by pressing MULTI-CONTROL. ! If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.) ! If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes ...
...signal by pressing MULTI-CONTROL. ! If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.) ! If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes ...
...on. Does not respond to anything except the power button(on the unit and the remote) after about 10-15 seconds when initially plugged in. Hear a clicking sound and there seems to be a discharge of ...
...blinks. Push MULTI-CONTROL up or down to put a clock right. You can match the clock to a time signal by pressing MULTI-CONTROL. the minutes are rounded down. (e.g., 10:18 becomes 10:00.) If 30 to 59, ...
...signal by pressing MULTI-CONTROL. ! If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.) ! If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes ...
...a series of 5 blinks on my pioneer elite and need a number i can call for serves 1-800-421-1404 Hours of Operation: Monday - Friday 10:00 a.m. - 7:30 p.m. EST Please take a moment to rate :]
Question about PureVision PDP-4340HD 43 in. Plasma HDTV
...blinks red 10 times When trying to turn on the TV, it starts off fine but the TV stand-by light just blinks red 10 times before pausing and starting again. The whole time the Media Center is normal ...
10-10hd powers on then blinks red 2 times Visit the site named ‘Electro-help’ for more details. Check this link and select the site named above. View it in ‘Flip card’ option,
Question about PDP5016HD 50 in. Plasma Television
...down and the power light blinks 10 times, what is wrong? It won't power back up, the power light blinks 10 times, pauses then blinks 10 times. The X DRIVE DC-DC PC board part number AWZ6991. ...
Question about PDP-436RXE 42 in. HDTV-Ready Plasma Television
10 years old but is a good unit and what would this part cost to replace. thanks terry These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON,
Usually answered in minutes!
240 Questions
257 Questions
245 Questions
227 Questions
184 Questions
