Questions & Answers for: Meade 10 778

hand controller im looking for a hand controller for a meade lx-10 I would check the classifieds at cloudy nights forum or ask around there. most likely one should show up.. Or someone will know how ...

Can't get to focus. My telescope was boxed for 10 months. Now I turn the knob and even without the grub it still will not focus. I turned the knob for about 10 minutes and it nothing. I think that the

10" Meade Fork, Quartz LX Pulse Drive Moved 10" SCT to Orion Atlas and am adapting twin 6" Objectives in a binocular arrangement to the old mount, sans the fork. Lost 12 volt adaptor and was wondering

Meade 10'' LX 10 will not focus My Meade 10" LX 10 wont focus properly I that the primary mirror or the micro focuser?

Looking for a French documentation for a Meade LX 200 ACF 10'' tel if possible, some computer file Thanks in advance For a documentation for the LX 200 ACF 10" in French, one can call the following ...

I recently aquired the bottom part of a Meade Lightbridge 10" Truss Dobsonian Telescope. This includes the Primary Mirror & tube that contains it plus the 3 Struts and not much else. I think I can

10 years and everything worked. The battery connection does not work well without holding it in a certain position either. Any help for a novice would be gratefully accepted. bad way to start out.....

in the exact position as when you removed it. You are now left with trial and error-- turn the lens 10 degrees- check collimation-- turn the lens 10 more degrees check collimation etc etc -- until you

10"LX200 EMC that will not 10"LX200 EMC that will not turn on,checked the fuse and it was still good. Are there any other parts that I should check that may have gone bad? This model LX200 ...

I have an LX200 10" with apparent drive issues. Vertical drive speed seems locked on maximum speed. When auto align is selected the scope moves in all the right directions but vertical moves are at ...