Questions & Answers for: 100 amp breaker wont stay

Question about D Qo 100 Amp Breaker Box Qo120m100 Indoor Panel

1 Answer

...100 amp service box began tripping when certain large appliances were running the same time my central air unit was running. Nothing has changed as far as appliancec or wiring in about 6 yrs. What ...

Ad

Question about 100 Amp Main Breaker Resident Load Center

1 Answer

...100 AMP MAIN, THE POWER LINE FROM OUTSIDE IS WIRED DIRECTLY TO THE BUSS BAR--- HOW IS THAT POSSIBLE? NO 100 AMP MAIN IS INSTALLED, DID THE BOX COME WITH ONE? It sounds like you have a main lug only ...

Ad

Question about 100 Amp Main Breaker

1 Answer

...breaker still clicks in and out with some resistance and has stays clicked in Best way would be to clamp an amp-meter on and check draw at time of tripping. If it's been tripping often, that will ...

Question about 100 Amp Main Breaker Renovation Panel

1 Answer

...100 amp main (branch) breaker. Is this available and where could i get one Thank You Mark you will have to get the branch breaker and a breaker holder kit to do this these breakers are not ...

Question about 100 Amp Main Breaker

1 Answer

100 amp service. 2 breakers connected together 50 amp each. power was shut off. Had to shut off main before ir was turned back on. when power was restored, breaker would not stay on unless it was done

100 amp or the e a n code The General Electric THQL two pole 100 amp double breaker? http://www.azpartsmaster.com/Products/Circuit-Breaker----GE-THQL-100-Amp-DP__BKRTHQL21100.aspx It's coded HACR.

Question about 100 Amp Main Breaker Resident Load Center

1 Answer

...breaker doesnt stay in on position Turn the handle all the way to the OFF position, then turn it to ON.  If it is tripping, then turn OFF all breakers, then turn ON the main.  Turn ON each ...

...do I need to put a sqr d 100 amp subpanel 33 feet away? ... is # 6-3 too small? According to my sources you need to use size #1 AWG copper wire for a 100 Amp circuit. #6 wire can only handle 55

Question about Corporation BR2100 Circuit Breaker

1 Answer

...100 Amp (for the part number "BR2100", the "2" indicates the number of poles and the "100" indicates the amperage) circuit breaker. It can be installed in a single phase or three phase 120/240 VAC ...

...100 amp breaker is tripping but none of the inside breakers, supposedly when dryer and tv on together but not all the time we had 3 calls at this one apt. The outside main breaker has tripped three ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...