Questions & Answers for: Hoover 035

Replace the belt I need to know how to replace the 38528-035 belt on a hoover self propelled begless vacuum Take off the bottom plate, put the new belt on the motor shaft first, then stretch it to go ...

Replace the belt I need to know how to replace the 38528-035 belt on a hoover self propelled begless vacuum I need to replace belt number 38528-035. I cannot really see what it attachs to. I am trying

replacement belt # for hoover wind tunnel model u5750-900. original belt # 38528-035, please your belt number is correct ending in 035. I have had luck with belt number ending in 033 also.

...U 6439-900. The agitator brush will not turn. I installed 2 new belts, # 38528034, and # 38528-035 There is so much slack in belt # 3852034 (brush drive) that it cannot grip the brush. There

roller brush does not turn The drive belt is worn. you can get the replacement belt here: http://vacbelts.com/hoover-windtunnel-38528-035-belt.htm

...anthing on the floor check the brushroll if it spins freely, replace the belts 38528-034 and 38528-035. and make sure the tensioner for the V belt engages when you release the handle and pull the ...

brush doesn't move when turned on replace both belts part # 38523-034 the V belt and 38528-035 the flat belt. Inspect the brushroll groove for wear. the top of the V belt should almost ride flush with

...that may hang up the bar itself to no avail. replace the belts part # 38528-034 V belt and 38528-035 flat belt also inspect the belt groove on the brushroll if the new belt rides deep in the

...and I'm having trouble replacing the belt. The extra belt that came with it was belt # 38528-035 and it's smaller then the old one and I'm having a hard time putting it on. Is this the right ...

...correctly. The idler pulley can be tricky. Some models have two belts. If it has the 38528-035 belt it may be stretched out