I have built in Freeview in my Hannspree television. The picture has completely gone, and I have tried retuning, but to no avail. The message is 'database empty', but according to the operator at Digital Switchover, there is not a problem from the Blackhils area, which is my transmission area. What can I do?

This tv is a flat LCD tv wright?Not a big bulge back CRT tube tv,If this is CRT tv is analoge design tv dosen't have freeview Digital Tuner inside of the tv.If it is a flat LCD tv.Make sure ur setting for retuning not on CALBE SETTING.Make sure ur tv setting are AIR SETTING and have good Digtial antena will get a stronger signal get all the free AIR broadcasting stantoins channels,a good strong Digital antenna design does make big a different.

SOLVED: I have built in Freeview in my Hannspree - Hannspree (K206-10U1-005)...

0helpful

1answer

Bbc1 1nd 2 not on my freeview TV after several

reset the TV to factory settings and try again

Read full answer

Nov 25, 2009 • Samsung LE26R74BDX 26 in. HD-Ready LCD...

0helpful

1answer

I have a Panasonic Quintrix which only seems to store some channels when you retune for new channels, eg BBC 1 has gone and been replaced with 4tv interactive. Any ideas how to get it back?

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Read full answer

Oct 02, 2009 • Panasonic TX-32PL10 32" TV

0helpful

1answer

Retuned my Freeview receiver but now have black bars.

The retuning process is as follows:

Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
Press the BLUE button to display the MAIN MENU.
Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
Press the RED button to start the auto tuning process for all available digital channels.
Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Read full answer

Oct 01, 2009 • Sony BRAVIA KDL-40V4000E 40 in. LCD TV

0helpful

1answer

How do I retune my goodmans television for

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Read full answer

Oct 01, 2009 • Goodmans W280NS Television

2helpful

1answer

I tried to retune the built in freeview on my 37inch samsung tv and I have lost most of the channels and the picture is very bad on the rest of them. It was fine until I tried to retune it, how do I get it...

Find the D menu button on your remote and go to channel sort rescan using auto retune.

Read full answer

Sep 30, 2009 • Samsung Televison & Video

0helpful

1answer

How to retune model no. 26PF7521D/10 television

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Read full answer

Sep 30, 2009 • Philips 26PF7521D 26 in. HDTV-Ready LCD...

1helpful

1answer

No remote - how to i retune next week for Freeview

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Read full answer

Sep 26, 2009 • RCA 20F510TD 20 in. TV/DVD Combo

0helpful

2answers

Re-tuning Freeview

Just run scan using your remote

Read full answer

Sep 20, 2009 • Sony BRAVIA KLV-40U100M 40 in. HD-Ready...

0helpful

1answer

Bbc1 and 2 on freeview lost

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Read full answer

Jun 20, 2009 • Panasonic 50 in. Plasma TV

0helpful

1answer

Cant retune my digtal freeview as my picture keeps freezing

The retuning process is as follows:

Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
Press the BLUE button to display the MAIN MENU.
Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
Press the RED button to start the auto tuning process for all available digital channels.
Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Read full answer

Jun 02, 2009 • Samsung HL-S5086W 50" HDTV

Related Topics:

Trustworthy Expert Solutions

1 Answer

Chi Chu

Add Your Answer

Attachments: Added items

Related Questions:

Bbc1 1nd 2 not on my freeview TV after several

I have a Panasonic Quintrix which only seems to store some channels when you retune for new channels, eg BBC 1 has gone and been replaced with 4tv interactive. Any ideas how to get it back?

Retuned my Freeview receiver but now have black bars.

How do I retune my goodmans television for

I tried to retune the built in freeview on my 37inch samsung tv and I have lost most of the channels and the picture is very bad on the rest of them. It was fine until I tried to retune it, how do I get it...

How to retune model no. 26PF7521D/10 television

No remote - how to i retune next week for Freeview

Re-tuning Freeview

Bbc1 and 2 on freeview lost

Cant retune my digtal freeview as my picture keeps freezing

Not finding what you are looking for?

(K206-10U1-005) Television

Bbc1 1nd 2 not on my freeview TV after several

Ask a Question

Check Out the Latest HD Televisions Report

Top Hannspree Televison & Video Experts

Grand Canyon Tech

Brad Brown

Cindy Wells

Are you a Hannspree Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

1 Answer

Chi Chu

Add Your Answer

Attachments: Added items

Related Questions:

Bbc1 1nd 2 not on my freeview TV after several

I have a Panasonic Quintrix which only seems to store some channels when you retune for new channels, eg BBC 1 has gone and been replaced with 4tv interactive. Any ideas how to get it back?

Retuned my Freeview receiver but now have black bars.

How do I retune my goodmans television for

I tried to retune the built in freeview on my 37inch samsung tv and I have lost most of the channels and the picture is very bad on the rest of them. It was fine until I tried to retune it, how do I get it...

How to retune model no. 26PF7521D/10 television

No remote - how to i retune next week for Freeview

Re-tuning Freeview

Bbc1 and 2 on freeview lost

Cant retune my digtal freeview as my picture keeps freezing

Not finding what you are looking for?

(K206-10U1-005) Television

Bbc1 1nd 2 not on my freeview TV after several

Related Topics

Ask a Question

Popular Questions

Can't get my hannspree remote to work with comcast

Code for hannspree remote control

GE Universal Remote Code for Hannspree Tv

Universal code for the hanspree

Code for sky remote control

Check Out the Latest HD Televisions Report

Top Hannspree Televison & Video Experts

Grand Canyon Tech

Brad Brown

Cindy Wells

Are you a Hannspree Televison and Video Expert? Answer questions, earn points and help others

Manuals & User Guides