I can not remember how to send a fax help - Sharp UX 60 Fax

Hi,

To print fax send confirmation report:



You can use the Transmission Verification Report as proof that you sent a fax. This
report lists the time and date of transmission and whether the transmission was successful
(OK). If you choose On or On+Image, the report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than the job numbers to
know which faxes you must send again.

Choosing On+Image or Off+Image will print a section of the fax's first page on the report
to help you remember.

When the Transmission Verification Report is turned Off or Off+Image, the Report will
only print if there is a transmission error, with NG in the RESULT column.

You need to set up the Transmission Verification Report and Journal Period in the menu table.
Press Menu/Set, 2, 4, 1.
-OR-
Press Menu/Set, 2, 4, 2.
You can use the Transmission Report as
proof that you sent a fax. This report lists the
time and date of transmission and whether
the transmission was successful (OK). If you
select On or On+Image, the report will print
for every fax you send.
If you send a lot of faxes to the same place,
you may need more than the job numbers to
know which faxes you must send again.
Selecting On+Image or Off+Image will print
a section of the fax's first page on the report
to help you remember.
Note
When the Verification Report is turned Off or
Off+Image, the Report will only print if there
is a transmission error, with ERROR in the
RESULT column.
1 Press Menu/Set, 2, 4, 1.
2 Press ? or ? to select On, On+Image,
Off or Off+Image.
Press Menu/Set.
3 Press Stop/Exit.
Printing reports
1.XMIT Report
2.Journal Period

Certainly not your fax machine problem.

The client needs to verify your fax number.

Even though you have internet, have you connected a phone line? Most fax machines/software rely on the phone line. I don't know how you are sending a fax. If you are sending a fax directly from an all-in-one, you'll need to connect the phone line to the back of that device. If you're sending a fax using a program on the computer, you'll need to connect the phone to the back of the computer.

You can temporarily disconnect your land-line phone and connect it to the all-in-one or computer. Just remember to reconnect it when you are done so you can receive phone calls.

I hope this helps!

We have the same problem and the fax will send and receive only if the printer cord is pulled out of the back of the printer. I just keep the printer cord pulled out and put it back in only when I need to print a document from the comptuer.

Hello,

You can review the User Gide here. Information on faxing starts on page 12. Hope this helps. Please remember to rate this information.

First make sure that the fax button has been pushed and is llit...

The 2820 should have a handset. In order to use manual transmission (when you get to hear all the beeps and whistles) you will need to load the document then pick up the handset. then dial the number, when you hear the recieving fax tone then hit the start button.

The 2820 should also have a hook hold button pressing this will allow you to hear the dial tone and the numbers you dial along with the receiving fax tone. If you dont hear anything when you press this button then you may want to use the volume buttons to increase the volume.

Also remember that if you have not picked up the handset or pressed he hook/hold button the unit will use automatic mode, which is to say that all you will do is load the document, dial the number, and then press the start button.

did you put the originals page(s) in the machine FIRST to fax, then enter the number then press start?
If you enter the phone number 1st BEFORE putting your originals in the feeder, the machine thinks you want to make a copy.
The FAX Mode is the setting for incoming faxes.
Try that and let me know if it works.
There should also be a button called "Hook" or "speaker" or something that you hit and you will hear the dial tone.
Once you hear the dial tone, you can dial the number, (make sure the pages you want to fax is in the feeder.
Once you hear the fax high pitch noise, hit the start button.
Hope this helps.
Let me know if it does and also remember to leave a feedback and rating if I have helped you.
Thanks and good luck.
Mac =)

place the original to be faxed in the paper in tray slot. Press the phone number that you would like to dial, then press the green button to send.
That should be it.
Hope this helps.
Feel free to ask any other questions if you have any.
If Ive helped you with your question, please remember to leave your feedback and also a rating for me.
Thanks and good luck.
Mac

plz download the manual here:
http://welcome.solutions.brother.com/BSC/public/us/us/en/model_top/colormfc/mfc3360c_all.html?reg=us&c=us&lang=en&prod=mfc3360c_all

BTW: Have a look at the faq, too.

As far as i remember this type of fax-machine the handling procedure is as follows:
press FAX put the letter to be send into the paper feeder which should pull it through. When done display demands tel/fax nr. which has to be set. press start (blue button). fax should be connected and send the message.