Question about HP LaserJet CM1015 MFP All-In-One Printer
CAUTION NVRAM initialization will erase all network settings. Before performing NVRAM
initialization, print a Network Configuration page, which contains network-setting information.
NVRAM initialization performs the following actions:
? Resets all customer-accessible menu settings via control panel and software back to the factory
? Resets the language to the value set at the factory
? Resets the default media size to cold reset media size
? Resets the symbol set to PC-8
NOTE The following steps reset the same NVRAM locations that are reset using the
Restore Defaults option in the control panel Service menu. The following process should be
used if the MFP does not come to a Ready state and an NVRAM initialization is desired.
Use the following procedure to perform an NVRAM initialization.
1. Turn off the printer.
2. Press and hold the Right arrow and Cancel buttons simultaneously.
3. Turn on the printer.
4. When you see the message Permanent storage init, release the Right arrow and Cancel buttons.
When the NVRAM init is complete, the printer returns to the Ready state.
Posted on Aug 02, 2011
Tips for a great answer:
Aug 19, 2017 | Konica Office Equipment & Supplies
Apr 28, 2015 | HP LaserJet P2015n Printer
Mar 18, 2013 | HP Color LaserJet CM6040f MFP Q3939A...
Aug 17, 2011 | HP Color LaserJet CM1015 Printer
Jul 30, 2011 | HP LaserJet 1300 Printer
Dec 12, 2009 | HP LaserJet P4015N Printer
Nov 02, 2009 | HP LaserJet CM1015 MFP All-In-One Printer
3,417 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: