Saeco Royal Machine says "ventilate", but when we

Place a jug under the milk frother and turn the steam knob to allow hot water to flow.
Ventilate will clear after a short time

If you have a water button ( the one with the drop icon) push it. If you don't have one, turn the steam knob.

You can turn the water knob and let it pour out some hot water from steam wand. If your machine does not have any problem with scale the the masage ventilate will go away and work normal again.

Please release hot water as well as steam by selecting both the selector switches( press hotwater button and open the steam knob).
Still you have the same problem,better you have to consult with service technician( there may be problem with boiler section)

Hi
You only push the water button. Don't turn the knob, that is just for steam. There is a button for the cappuccinotori though, that you push.

try prime water on steam valve couple minuts if you have again message ventilate,that can be two reason,or your flow metar doesnt work or cpu board,but you try first prime water.

Press the steam knob in, if that works take it back and tell them to replace the tap rod assembly.

Hi
!/4 turn is all the Magic and Royal machines will do. Don't try to turn it farther or you could break the steam valve.

Hi,

Make sure the steam pipe is clean, try to take off the steam pipe and open the steam knob to see if any water is comming out.

How old is the machine?
How often do you descale the machine?
Can you hear the pump start when you open the steam knob?

Alternatively, try draining the machine. Page 37 of the user manual, Drainage. Place cup under the steam/hot water tube, turn knob clockwise around to 9. If the pump is ok, it will start automatically and start filling the cup. Drain about 1/2 cup of hot water and return knob counterclockwise to start position. If the flow meter is not damaged, the Ventilate message should be gone.