Epson PhotoPC L410 Digital Camera Logo

Related Topics:

Question about Epson PhotoPC L410 Digital Camera

1 Answer

The camera does not take a photo when I press the shutter button. What should I do?

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 542 Answers

Check the following: * Make sure the battery or batteries have power and are correctly installed. You may need to replace the batteries. * Make sure the power is on. The camera may have turned off automatically to save power. Press the POWER button to turn the camera on. * Make sure the Mode dial is set to the correct mode. The shutter button will operate when it is set to Manual mode, Automatic mode, Continous shooting mode and Video mode. * Check the number in the lower left corner of the Camera’s LCD screen. If the number is 0, the memory card (or internal memory) is full. Copy the photos to a computer and delete them from the camera.

Posted on Sep 13, 2005

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My focus button keeps sticking on my Fujifilm S2000HD camera.?

Have you tried focusing before you take a photo? To do this, press down the shutter button on your camera but don't push it far enough to take a photo. This enables the camera to focus on what it's about to photograph before you press the shutter button again and take the photo.
0helpful
1answer

My Fujifilm Finepix XP21 takes pictures but always blurry and not focusing? Any body

Have you tried focusing before you take a photo? To do this, press down the shutter button on your camera but don't push it far enough to take a photo. This enables the camera to focus on what it's about to photograph before you press the shutter button again and take the photo.
1helpful
1answer

I hve transfered all the photos from my Hero 16 MG disk to my PC. it is still not allowing me to take new photos and videos just indicating "Full"Unclear how to erase my disk. Any assistance you could

Here are the steps to reformat your SD card with your HERO3 camera:
  1. Power ON your camera with the SD card inserted.
  2. Press the front (Power) button repeatedly until you see the wrench icon on the camera's screen.
  3. Press the top (Shutter) button one time.
  4. Press the Power button repeatedly until you see a trashcan icon.
  5. Press the Shutter button one time to select the trashcan icon.
  6. Press the Power button until "ALL/Format" is highlighted.
  7. Press the Shutter button one time to select "ALL/Format".
  8. Press the Power button until "Yes" is highlighted.
  9. Press the Shutter button one time to select "Yes". Your camera's LED and the trashcan icon will blink to indicate that your SD card is being reformatted.
Once they stop blinking, power OFF/ON your camera, and your file counter should show 00.
Important - Take a picture. This confirms that your SD card is successfully reformatted.
0helpful
1answer

All i want to know is if the canon a620 can be set to take a photo on its own without pressing the button to snap the photo....i want to take 'certain' photos of myself and no one to take...

No, you have to press the shutter release button to take the picture.
Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. This sets the self-timer. Start the self-timer by pressing the shutter release button as usual.
0helpful
1answer

Olympus E-300 Evolt when you press the shutter button to take a picture, the shutter rapidly repets for about 9 times

Solution 1 • Unlock focus area selector. • Auto-area AF selected for Custom Setting 2 (AFarea mode): choose another mode. • Press shutter-release button halfway to turn monitor o?¬? or activate exposure meter • Memory card is full, locked, or not inserted. • Flash is charging. • Camera is not in focus. • CPU lens with aperture ring attached without locking aperture at highest f/-number. • Non-CPU lens is attached: rotate camera mode dial to M. • Mode dial rotated to S after shutter speed of bulb selected in mode M: choose new shutter speed • P, S, A, and M modes: lower ?¬? ash. • Digital Vari-Program modes: turn ?¬? ash o?¬? Turn long exposure noise reduction o?¬? Turn long exposure noise reduction o?¬? Press multi selector up or down or rotate sub-command dial to choose photo information displayed Select All for Playback folder. Note that Current will automatically be selected when next photo is taken • Select On for Rotate tall. • Photo was taken with O?¬? selected for Auto image rotation. • Camera orientation was changed while shutter-release button was pressed in continuous shooting mode. • Camera was pointed up or down when photo was taken Use Nikon-approved card. • Card may be damaged. Contact retailer or Nikonauthorized service representative. • Delete unwanted ?¬ les or insert new memory car
1helpful
1answer

I have turned camera on and set up to take a photo and the shutter release button will not press in to take the photo. I used the camera yesterday and it worked fine!

Turn the camera on and look into the view finder while you try to press the shutter button. Check the information in the view finder to see whether you are getting an error message. If you see an error message in the view finder, remove the lens cap and proceed to take a photograph but, instead of pressing the shutter button this time, press the button near the top of the camera on the back which says "AF/AE. If the camera takes the photo it means you have somehow initiated the auto focus/auto exposure lock which the camera will not override when attempting to take a photo using the shutter button. When you use the AF/AE button, you override this system. To remedy this issue, when you get the error message try pressing the shutter button again. Also, remove the lens to see if the shutter inside has frozen in the "locked" position. If you find this to be the case you will need to contact Nikon Customer Support. The link for Nikon Support is below. The numbers are half-way down the page.

http://support.nikonusa.com/app/answers/detail/a_id/238
0helpful
1answer

Shutter release

take it back to the shop
0helpful
1answer

Shutter problems

I am having a similar problem with my eos 100QD.
shutter opens, then stays open until I depress the shutter switch again.
Sometimes about half my photos are lost on a roll, but the other photos are fine (as would be expected from how the film is wound). This problem looks like it's caused by the shutter mechanism failing, a common problem with older camera and one that is often more expensive to repair than it is to replace the body.
0helpful
1answer

The camera takes too long to take a photo. What should I do?

Press the shutter button halfway and hold it to set the focus, then press it the rest of the way down to take a photo. If you press the shutter button down all the way at once, it takes time to focus and set the exposure before the shutter releases. It may take longer than when pressing the shutter button in two steps.
Not finding what you are looking for?

164 views

Ask a Question

Usually answered in minutes!

Top Epson Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

598 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6393 Answers

August Brown
August Brown

Level 3 Expert

1182 Answers

Are you an Epson Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...