- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,
It may be possible that your CompactFlash Card is nearing its end.
You can try formatting it after you have downloaded into your PC all the pictures. Try to use the camera's built-in formatting function. Thereafter plug it back to your PC and use a disk checking utility such as scandisk or Norton Disk Doctor. Do an intensive check including the free space. If the disk check shows any errors, then the CompactFlash Card is no longer a reliable storage media and you are better off purchasing a replacement rather than gamble that it will still work.
If for some reason, even your PC can not access the card, you have to use a file recovery program to recover/download/copy the picture files and then try the disk check utility.
Hope this be of some help/idea. Post back how things turn up or should you need further information.
Good luck and kind regards.
Storing digital picture information to a CompactFlash card (as when a digital image is taken) is similar to storing data on the hard drive of a computer -- if the process is stopped or interrupted, the information stored is not complete and, therefore, "corrupts" the storage media. A computer will display a warning message indicating that the hard drive has errors, while a camera will display a message indicating the memory card is corrupted.
The CompactFlash card corruption can be caused by:
* Turning off the camera power before the photo information is completely stored on the card.
* Removing the card before the photo information is completely stored on it.
* Taking a second picture before the camera has finished storing the previous picture.
* Camera batteries that are near the end of their life and need to be replaced.
Once a CompactFlash card is corrupted, it can be used again only by performing a Format procedure.
IMPORTANT! When a CompactFlash card is re-formatted, any pictures stored on it will be lost forever and cannot be recovered.
Storing digital picture information to a CompactFlash card (as when a digital image is taken) is similar to storing data on the hard drive of a computer -- if the process is stopped or interrupted, the information stored is not complete and, therefore, "corrupts" the storage media. A computer will display a warning message indicating that the hard drive has errors, while a camera will display a message indicating the memory card is corrupted.
The CompactFlash card corruption can be caused by:
* Turning off the camera power before the photo information is completely stored on the card.
* Removing the card before the photo information is completely stored on it.
* Taking a second picture before the camera has finished storing the previous picture.
* Camera batteries that are near the end of their life and need to be replaced.
Once a CompactFlash card is corrupted, it can be used again only by performing a Format procedure.
IMPORTANT! When a CompactFlash card is re-formatted, any pictures stored on it will be lost forever and cannot be recovered.
A digital camera's Format command is used to prepare a removeable CompactFlash memory card to accept digital image information from the camera. A card should be formatted when:
* the card is new and has never been used before.
* the card was used in a different camera or other device that accepts CompactFlash cards.
* the card has become "corrupted" and will not store additional images.
Make sure you're using an ATA-compatible Type-I CompactFlash memory card. Make sure you've installed the card correctly. The card's label should be facing the front of the camera, and the arrow(s) on the label should point in.
Make sure you're using an ATA-compatible Type-I CompactFlash memory card. Make sure you've installed the card correctly. The card's label should be facing the front of the camera, and the arrow(s) on the label should point in.
You have (or a friend) a camera that takes the card you might try formatting on it. Seems there are formatting issues now and then that disappear on a camera.
×