An expert who has achieved level 3 by getting 1000 points
All-Star:
An expert that got 10 achievements.
MVP:
An expert that got 5 achievements.
Master:
An expert who has achieved Level 3.
Master
542 Answers
Re:
Make sure you look straight through the viewfinder. Keep in mind that the area visible through the viewfinder is slightly smaller than the area captured in the photo. If you're taking a close-up or macro mode picture, turn the camera dial to the LCD mode so that you can use your LCD screen to preview your picture.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If the photo has already been taken, and the area to the left has not been recorded, then there is no way that the missing part of the image can be restored. If, however, you notice the area is not in the viewfinder prior to taking the photograph, the solution is simple - re-frame the image, so that all of the subject appears in the viewfinder. If necessary, step back a pace or two (being mindful of any obstructions or other dangers behind you) until the viewfinder shows all that you wish to record. It is better to leave an area surrounding the subject, which can be removed in pp exercise, than to crop detail at the taking stage.
If the problem occurs when you are printing images, ensure that your image-editing software is set up to display the entire image, and that you are not inadvertently cropping it.
is it only the view finder or does it appear on the photo as well because if it the view finder then it is the screen and if it is on the photo as well then its most likely the lense and once you have deterined this then you can know if it is just dirty or if the screen needs replacing
This is often the result of little available light on the focus screen. The more ambient light (and more open the aperture is) the brighter and sharper the image is in the viewfinder. Less light effects the image in the view finder and makes it harder to see and focus.
If your lens only opens to f3.5 or 4.0 and you\'re trying to shoot indoors with available light - your lens may not let enough light into the camera to see the scene as well as you can with the naked eye. An f1.4 aperture lets eight (8!) times as much light as an f4.0 does and is why they\'re so expensive.
Try the same setup in a brightly lit (sunny day) scene to see if it goes away.
The only way to see the depth of field is to press the DOF button near the lens mount when looking through the viewfinder. Of course, make sure your aperture is nice and wide (lower number) as well.
Answer ID
16497
Why do I sometimes see a faint vertical line in my viewfinder?
Why do I sometimes see a faint vertical line in my viewfinder?
-->
With some DSLR cameras, a normally clear LCD screen is used to display Auto Focus area brackets in the viewfinder. When power is supplied to the screen, you may sometimes see a faint vertical line appear in your viewfinder. This is perfectly normal and is just part of the finely etched circuitry used to power and illuminate the liquid crystal segments of the AF area brackets.
It sounds like you have the display set to show image "highlights", this is a mode that shows parts of the picture that has become over exposed and have no detail contained within that area, in other words the parts of the photo that are pure white.
The camera Highlights as one of several different modes that can be flicked through after looking at a photo you have taken.
hope this helps
Ian
The depth of the filter may be enough to push the hood into the visible area.
This will be noticable at short focal lengths. Remember that the image of the hood will be very out of focus, and so even if the edge of the hood would 'land' oustide of the image with a tiny aperture, the out-of-focus fuzz may impinge on the corners of the frame.
Also that the viewfinder area is usually a little less than the actual frame area so you may not see vignetting in the viewfinder that appears on the picture.
One possible solution is to mount the filter on the front of the hood. Some hoods allow you to do this, others don't.
If not your solution is a different hood.
(Note that deep hoods work better, as a certain amount of stray light reflects off the inner surface of the hood.)
This sounds like you are trying to scan images at a larger size than they actually are? I am not an expert-(but I have a Mac)-but from what I'm reading, scan your photos at a 300-600 dpi resolution, then use photo editing software to enlarge them. The higher the resolution, the more disk space and the more photo detail (i.e. cracks, dust, scratches, paper type) will be captured, and the more time it will take to scan. Also, for the white, does your scanner allow you to select the area/define borders during the pre-scan? Mine lets me drag borders to just the image area (but capture the image first, then do the cropping and editing to a copy later). Rookie2112
Make sure you look straight through the viewfinder. Keep in mind that the area visible through the viewfinder is slightly smaller than the area captured in the photo. If you're taking a close-up or macro mode picture, turn the camera dial to the LCD mode so that you can use your LCD screen to preview your picture.
×