Dear Sir, We have one IBM x206 8482 I8S Serer. We have loaded Win XPP to this system and configured as Thin Client Server. The Thin Clients hang during the operation. The Thin client Vendor identifies this as Server problem stating following:- IBM Server do not Win XPP OS they work only on Win 2003 /2008 platform. The server do not have VGA Drivers for XPP. They demonstrated this by swapping this machine with a normal desktop with drivers for Win XPP and all the same Thin clients very well. Please help us to know if IBM server really do not support Win XPP OS. Also suggest link to download VGA and Ethernet drier for XPP for this machine.

SOURCE: IBM Netfinity 5600 8664 81Y Server

The disk that comes with the machine is called the NOS in the manual. It is also known as ServerGuide 6.0.3 which will config your Netfinity up to Win2000 Server. I used ServerGuide 7.3.06 to install Windows 2003 Server. The latest version (IBM ServerGuide Setup and Installation CD v7.4.17) is on the support IBM web site:
http://tinyurl.com/5fmv5k

SOURCE: server doesnt boot

First create a floppy disk with your RAID driver for W2K3 Server. Next boot the server with the W2K3 Server CD, and hit F6 when prompted, and S to add the specific driver for your RAID and using the floppy to get the driver installed.

Next boot to the recovery console of W2K3 Server. If it finds your hard disk, it will even ask for your Administrator's Password to continue. If this works, then you are probably home free.

Get to the command line of the W2K3 Server Repair console and perform some directory searches to see if the data is there and intact. You can also perform a CHKDSK from that console.

Once you have made sure your data is there and intact, type these two commands: FIXMBR and FIXBOOT

This should solve the problem and when you EXIT out of the console, it should reboot. Remove the CD and it "should" re-boot from the hard disk.

If you still have problems, let me know with how far you got with the steps above. I have another solution but need to know your RAID controller's model (ServeRAID 5i, 6i, etc).

-Chip

SOURCE: In IBM x236 server, one swap drive amber led is blinking

Please check how the disks are configured?
If mirrored and second mirror is avaliable you can
replace the disk. (It is the same if the raid5 configured.)

You can download the Hardware Maintenance manual from ibm to
help you in the disk replacement process:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/25k8114.pdf

SOURCE: hi sir, i want to

how will i wll get the Driver

SOURCE: About ibm server x3400 drivers

You can download the drivers from IBM's website:

http://www.ibm.com/support/us/en/