It could be a few things:
1. Check the belt that drives the blades; it could be broken or slipping.
2. Make sure the PTO Switch/Lever is working properly. The cable could be broken, or the spring that sometimes help to engage the blade could be broken.
3. There may also be a large stick lodged in the belt that drives the blades.
Good Luck!
Jim
terryky- Thanks for the rating!
If you should have any questions about"Drywall Finishing/Patching", or know someone who does, put your questions to Category:"Tools- Building & Power- HAND TOOLS" at FixYa.com
I will do my best to answer your questions about drywall finishing. However, it would be best if we could do a live Chat. I can answer any question you have if it involves getting a wall/ceiling ready for paint!
Thanks Again,
Jim
×
Low battery will make it not engage to for some reason
745 views
Usually answered in minutes!
×