I have a somewhat old Jornada where the screen is far out of allignement. When I start "screen calibration" or when I do a hard reset, I get in the calibration screen (with the moving cross). Now I can point on these crosses as often as I want, the screen doesn't change from saying I need to point on the cross or ESCape to cancel. It never comes to saying to press ENTER to confirm. I have done this almost 40 times now and it remains stuck on that screen.
Can anyone help ?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It could possbily be a loose connector or more likely its a broken flexi PCA. You could try swapping the screens with another Jornada, by buying a faulty one off of ebay that doesn't have a faulty screen.
Sounds like a loose connector inside, I had a similar problem after I took my 680 apart to replace a cracked screen. It took a few more dismantlings and re-assemblings until it settled down. You should also check the state of the button cell battery.