Mitsubishi projector XL30U temperature Warning. How to remove the sensor or fix the problem.

I would be its the polarizers. Whats it doing?

sometimes the output is in, but the signal is not there.
try the other inputs with other signal sources and see if all are not working

There should be an adjustment in the menu for "keystone". That should do what you want.

the light filter on one of the lecd panels is fried due to excessive dust and heat. unfortunately, you'll have to replace the entire optical engine, as the manufacturer does not sell individual parts.

you can try mitsubishi themselves, but from experience, they don't give out anything.

Hi Greg147

The resetting is not done in the menu.

Plug in your power cable - Machine is now in standby mode.

Then Hold down the left and right arrow keys on the Projector and press the power button. You'll see a indicator light on top of the Projector flashing twice - Lamp hours is now reset.

Hope this is of help.

Hello Media Man,

Looks like your projector has done it. Thats acommon trouble to ageing polirising lens, usually the blue. less blue, the green and red make up the yellowish image on the screen. The blue is bombarded with tremendous heat from the lamp and it fade and wash out. If its free, its worth replacing. Get quote for the poliriser; 2 pieces each color.
Good Luck.

chang vga cable and check colour from menu.