Y adapter to speaker subwoofer

I can find not much on the Cineblue speakers. What kind of cable does it use to connect? Is it a stereo sub mini plug? If so, you may need an adapter to connect it to the Audio outputs on the back of this particular set. Here is my first suggestion.That is the simple solution. there are many other types of cables/adapter boxes that will solve this issue.

Hi,

How to Connect 2 Subwoofers to One Receiver

Subwoofers produce the deep bass sounds that give home theater the realism of being at the movies. A good subwoofer can rattle the walls during action sequences, while adding depth to recorded music and a heightened sense of feeling in the midst of a televised sporting event. Because most home theater receivers are equipped with a single subwoofer jack, connecting a second subwoofer requires a simple audio adapter available at electronics stores. Self-powered subwoofers have their own built-in amplifiers to drive the bass speakers, so they cannot drain power on the main receiver in a system and thus pose no danger to the equipment, even when an extra subwoofer is connected.

Things You'll Need:

Home theater receiver
Y-adapter with RCA jacks on two ends and an RCA plug on the other, available at electronics stores.
2 RCA subwoofer cables
2 subwoofers


Instructions


Plug the Y-adapter into the home theater receiver's "Subwoofer OUT" jack.


Connect an RCA subwoofer cable to each jack on the Y adapter and route the cables to the subwoofers in the room. Because subwoofers deliver an omnidirectional sound, the boxes can be placed anywhere they won't get in the way, but within reach of an electrical outlet..


Plug an RCA cable into the "Sub IN" jack on the back of each subwoofer.


Connect the subwoofers to wall outlets and turn on each unit by pressing the power button, typically located on the back panel.


Adjust the volume and crossover settings on each subwoofer as desired. The crossover adjustment knob tells the subwppfer which low-end frequencies to reproduce from the audio signal, such as a movie on DVD. All frequencies higher than the crossover setting will be transferred to the other speakers connected to the receiver.



Tips & Warnings

Use subwoofers that are closely matched in power, as rated in watts, when using two subwoofers in a home theater setup.

Disconnect the subwoofers from the power supply while making the audio connections.


Have a nice day...

This is normal operation.. The subwoofer will only play sounds below a set frequency...There may be a crossover setting in your menu that you can adjust the frequency cutoff to your liking.

The original Pioneer subwoofer has its own amplifier built in to the speaker, so the only cable required on the original speaker is a single RCA cable. To connect a different brand subwoofer to the Pioneer you will have to make sure that you have a subwoofer with the same specs. It will need its own built in amp to work, as you can only connect it with one RCA

Yes ! all you have to do is go to radio shack and tell them you want a coaxil to RCA adapter (screw coaxial into wallplate and plug RCA end into sub and your all set!)
Please rate answers and help keep this site FREE!
Thank You

Look at the plug.... is it metal then a little band and then the tip or is it metal a band then metal and then the tip.

Television & Video Sales & Service 525 Dexter North, Seattle, WA 98105 (206) 784-4178 A M Stereo & Video 12509 Lake City Way Northeast, Seattle, WA 98125 (206) 364-5904 AAT Television 3429 4th Avenue South, Seattle, WA 98134 (206) 447-2288 AC TV & Video Sales & Service Mobile Svc & Installations - Authorized Dealer (206) 784-4178 (360) 643-3254 (877) 764-5539 (toll-free) Email: kenactvvideo.com Adams TV 4411 Fremont Avenue North, Seattle, WA 98103 (206) 632-4211 (206) 632-1280 (fax)

guys wrong iso adapter.go to propper audio shop