When sending VHS NTSC signal from SONY SLV SE810E to my SONY DCR-TRV30E inorder to send the signal to my PC for caprturing (In Adobe CS3 Premiere Pro), the DCR-TRV30E shows the NTSC VHS picture for a half a second and then the screen goes to blue (on the DCR-TRV30E)...and only audio is heard in the DCR-TRV30E BUT no picture. With a PAL system VHS the signal is seen...but my VHS tapes I want to capture to my PC are all NTSC. Will the DCR-TRV30E NOT BE ABLE to receive the NTSC picture signal?

SOURCE: Capturing from sony dcr-trv30e to computer

Required info are available on following Sony web link.
http://esupport.sony.com/US/perl/news-item.pl?mdl=DCRTRV30&news_id=128

SOURCE: Sony Handycam DCR-TRV30E driver

Well Windows 7 has no camera drivers at all built-in, Sony are developing them I am told, if you use a Firewall cable to PC then no drivers are needed.

SOURCE: Export to Imovie 9 from Sony DC DCR-TRV30E PAL

You can use iMovie Video Converter to import your video files to imovie.

Free Guide:
http://www.ilifesoft.com/how-to/import-video-to-imovie.htm

SOURCE: My device is connected. Ulead VideoStudio says:

• The USB connection only allows transfer of pictures and movies stored on the Memory stick. The videos recorded to DV tape is NOT accessible through the USB interface. You must transfer taped videos using i.Link.
• Go get a Firewire (also known as i.Link and IEEE 1394) cable to connect to your computer's Firewire port. Adding a Firewire PC card is relatively inexpensive, but make sure that card has BOTH the 4 pin and 6 pin connections, for most flexibility.
• Once you connect the camcorder with the Firewire cable, the Ulead VideoStudio will see the camcorder as a video capture device, without additional software or drivers.