Olympus Camedia C-4040 Zoom Digital Camera Logo

Related Topics:

Question about Olympus Camedia C-4040 Zoom Digital Camera

1 Answer

Bright pixels? All the pictures I take seem to have four bright (blue) pixels exactly in the same position, all next to each other (2x2 square) The problem is not visible unless you zoom the pic quite a lot on PC. Is this "normal", or should I take the camera back to store?

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 852 Answers

Just a thought: doesn't the C-4040Z have pixel mapping for just this eventuality? Run that, and the stuck pixel cluster should disappear. Of course, whether you should * have* to use the facility straight away is a matter of personal opinion..., but at least there is something you can do about it. Use caution though, as presumably you can't get the stuck pixels back afterwards to use as your reason for returning the camera.

Posted on Sep 11, 2005

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Dead Pixel Issue?

It must be really hard to get all the pixels in a large screen to be working. I've seen many with a very small number of pixels dead or stuck at one color
0helpful
1answer

Hisense TV - right half is blue

change your tcon board and you will be fine
0helpful
1answer

Change to resolution after picture taken

Sorry, can't be done. Those pixels weren't recorded, so there's no way to regenerate them.

Think of it this way. Suppose you look out the window and see a red car drive by. Look out the window an hour later and maybe a blue car drives by. Now, how many white cars drove by between those two cars? If you weren't looking (or had a surveillance camera), there's no way to tell. In your picture you've got a red pixel over here and a blue pixel over there. There's no way to tell what was in between.

There are some tricks that can be done to interpolate. If you have a bright red pixel and next to it a dark red pixel, then the pixel between them probably was a medium red. But maybe not: there could have been a blue object in between. Or the pixel in the middle might have been the same color as one of its neighbors. There's just no way to be certain.
14helpful
4answers

Left top corner of screen is MUCH brighter than rest of screen. 2x2 inch area

I had same problem, go to the menu and under PICTURE BOOST there are 6 options choose BRIGHT FRAME and turn it OFF. Corner white blob is gone.
0helpful
1answer

White parts of picture turn bright pink after about 30 minutes

sounds like red pixelation. contact vizio and describe your problem. use an alternate input and try to duplicate problem but you may have a bad main board and or av connector. check with vizio some parts are lifetime warranty and free service call. hope this helps, j
0helpful
1answer

Two blue dots on the screen

its sounds like the guns has burnt your yube, when switching of does your tv show a bright circle in the middel, or while watching. Smack your tv on the side while on see if the picture goes away or make a bright circle in the middel, this is caused by a bad solder joint but you wont get rid of the bunt pixels sorry.
0helpful
1answer

A week ago I purchased a Canon Ixus 970 digital camera. When using in dark conditions yesterday, I noticed two bright blue dots on the LCD screen. I've switched the camara off and on again and have...

You could try taking it back to the store if the (what seems like) the dead pixels are "distracting" you or "annoying" and if you are lucky you might get it exchanged.

It partially depends on the amount of the dead pixels present as for an LCD screen to be classed as being defective 0.01% of all of the pixels on the screen must be "dead".

God luck if you will try to exchange it.
0helpful
1answer

Pink highlights on LCD screen

IT SOUNDS LIKE THE MAIN BOARD IS BAD. THERE IS 2 DIFFERENT VERSIONS FOR THIS SET .AM02 UNITS OR VERSION 0001 UNITS. THE PART NUMBER IS BN94-00695E. THEY BOTH ARE ABOUT $210 + $50 CORE.
DON..


0helpful
1answer

SAMSUNG PLASMA

Do you mean that you have a bright blue dot on the screen that stays on all the time???

If this is correct, there is a fault in the display driver where a single pixel or a number of them are turned on all the time. This can be in the pixel driver device or circuit itself, or there may be a fault inside of the Plasma screen itself right at the lit pixel(s).

When you take the set in for service, they will be able to determine the exact fault. If it what I think it is, the service cost may not be feasible. I hope you have an extended warranty on this set!

Jerry G.
0helpful
1answer

Blue bright pixels on Samsung PS42Q7HD

I had bright blue pixels on the left hand side of the screen only when the engineer came he said it was blue haze and an upgrade would sort it and it did. hope this helps
Not finding what you are looking for?

66 views

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

598 Answers

David Shaub

Level 3 Expert

2994 Answers

Steve

Level 3 Expert

3290 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...