Can't open my home page

If you remember the password of your iPad, it's would be easy. However, you can still refer to below steps to unlock an iPad without password.
It is a good habit to have your iPad backed up regularly. In case of your iPad is locked, disabled or being stolen, you can easily recover your data from it. Otherwise, you'll lose all the data. To unlock iPad screen without password or to unlock disabled iPad mean you have to remove your previous pass code and restore your iPad. Here we introduce three methods which you can follow.
Method One: How to unlock iPad without password using iTunes

• 1. Connect iPad to the computer you have synced with.
• 2. Open iTunes on your computer and connect it with your iPad. If fortunate, you can enter the iTunes without password. But in most cases, there would be prompt asking for a pass code. Try another computer you've synced with, or use recovery mode. (The recovery mode will be mentioned in method three.)
• 3. Find your iPad in summary and make a manual backup. Once the backup have finished, click Restore your iPad with the most relevant back-up.

Method Two: How to unlock iPad screen without password with iCloud
You can also use iCloud to remove your password and recover your data if you have backed up before it was locked. And it is in the premise that you have set up Find My iPhone on your iPad, and you did remember your Apple ID, you can use iCloud to unlock your iPad.

• 1. Open your laptop or computer, go to icloud.com/find or open the iCloud app.
• 2. If the sign-in window pops up, just sign in with your Apple ID.
• 3. There's an All Devices button at the top-left of the window, click on it to call out a drop-down menu and choose your iOS device.
• 4. Click Erase (your device) in the prompt to finalize the process.
• 5. Now you can either recovery data to your device from a backup or set up as new if there isn't any back-up before.

Method Three: How to unlock a disabled iPad in recovery mode?
If you've neither synced with iTunes nor set up Find My iPhone in iCloud, you'll need to wipe your iPad to factory setting to remove the password, which means you'll suffer losing all your data on iPad and get it as a new one.
Please pay attention there is a slight difference in putting different models of iPad into recovery mode.
iPad Air

• 1. Turn off your iPad Air, press and hold the Home button.
• 2. While holding the Home key, connect the USB cable to the device. Wait until the Apple logo appears and keep holding the Home button for few more seconds.
• 3. Continue holding the Home button until the iTunes logo appears.

iPad mini/iPad pro

• 1. Connect your iPad to your computer or laptop and open iTunes.
• 2. While your device is connected, force to restart it.
• 3. Press and hold the Sleep/Wake and Home buttons at the same time. Don't release when you see the Apple logo. Keep holding both buttons until you see the recovery mode screen.

Now you have entered the recovery mode, and

1. When you see the option to Restore and Update, click it.


For more details, check: How to Unlock iPad

Under this circumstance you may have to reset the iPad if you forget both Apple ID and its password.

To reset iPad without Apple ID, you need first put iPad into DFU mode and connect it to your iTunes. Your iTunes will help you to reset your iPad without entering Apple ID easily. Resetting your iPad with this method will result in wiping all the data in your tablet. The following steps will show you how to do that.

Step 1: Open iTunes on your computer and connect your iPad to the computer with a USB cable.
Step 2: After that, turn off you device. Press and hold the Home button for 3 seconds.
Step 3: Put your iPad into DFU mode: Press and hold the Power and Home button for 10 seconds. Then release the power button and keep holding the home button. When you see the Apple logo disappears, you have successfully put your iPad into DFU mode.
Step 4: When iTunes detects that your iPad is in recovery mode, you can restore it now.
Step 5: Click on Restore iPad. Then you will be notified after the reset and your iPad will take a restart.

After resetting your iPad with the guidance mentioned above, you'd better create a new Apple ID and password in time. After resetting iPad, you will get all the data swept from iPad, and you can restore the files from your iPad, iTunes backup or iCloud backup. However, you can't backup iPad to iTunes/iCloud without Apple ID before you reset your iPad . In this case, you need the third-party iOS data recovery software to help you recover lost data from iPad after factory reset without Apple ID.

http://www.leawo.org/tutorial/how-to-reset-iphone-without-apple-id.html

Generally speaking, you need the Apple ID to reset your iPad. iPad needs you to enter the Apple ID to switch off your account and the Find My iPhone service will be turn off. If you are using iTunes to reset your iPad, you need to enter the Apple ID when your iPad reboots.

But if you have no Apple ID or passcode, you will have to reset your iPad without Apple ID. To reset iPad without Apple ID, you need first put iPad into DFU mode and connect it to your iTunes. Your iTunes will help you to reset your iPad without entering Apple ID easily. Resetting your iPad with this method will result in wiping all the data in your iPad. The following steps will show you how to do that.

Step 1: Open iTunes on your computer and connect your iPad to the computer with a USB cable.
Step 2: After that, turn off you device. Press and hold the Home button for 3 seconds.
Step 3: Put your iPad into DFU mode: Press and hold the Power and Home button for 10 seconds. Then release the power button and keep holding the home button. When you see the Apple logo disappears, you have successfully put your iPad into DFU mode.
Step 4: When iTunes detects that your iPad is in recovery mode, you can restore it now.
Step 5: Click on Restore iPad. Then you will be notified after the reset and your iPad will take a restart.

After resetting your iPad with the guidance mentioned above, you'd better create a new Apple ID and password in time. After resetting iPad, you will get all the data swept from iPad, and you can restore the files from your iPad, iTunes backup or iCloud backup. However, you can't backup iPad to iTunes/iCloud without Apple ID before you reset your iPad. In this case, you need the third-party iOS data recovery software to help you recover lost data from iPad after factory reset without Apple ID.

http://www.leawo.org/tutorial/how-to-reset-iphone-without-apple-id.html

Just try resetting the iPad by turning off and then back on. The reboot sometimes helps. Hold the on off button down for a few seconds and then turn off.

double click home button and you will see all apps you previously opened. Just close all of them by swiping up. Reopen photo app and see if that helped.

You will have to restore it by connecting to iTunes on your computer. That will erase all settings including the password. If you have a backup you can get it then set up as a new device with a new password.

You have to reset your iPad. Just follow below steps.

How to unlock iPad without password or how to unlock disabled iPad? It is a good habit to have your iPad backed up regularly. In case of your iPad is locked, disabled or being stolen, you can easily recover your data from it. Otherwise, you'll lose all the data. To unlock iPad screen without password or to unlock disabled iPad mean you have to remove your previous pass code and restore your iPad. Here we introduce three methods which you can follow.
Method One: How to unlock iPad without password using iTunes

• 1. Connect iPad to the computer you have synced with.
• 2. Open iTunes on your computer and connect it with your iPad. If fortunate, you can enter the iTunes without password. But in most cases, there would be prompt asking for a pass code. Try another computer you've synced with, or use recovery mode. (The recovery mode will be mentioned in method three.)
• 3. Find your iPad in summary and make a manual backup. Once the backup have finished, click Restore your iPad with the most relevant back-up.

Method Two: How to unlock iPad screen without password with iCloud
You can also use iCloud to remove your password and recover your data if you have backed up before it was locked. And it is in the premise that you have set up Find My iPhone on your iPad, and you did remember your Apple ID, you can use iCloud to unlock your iPad.

• 1. Open your laptop or computer, go to icloud.com/find or open the iCloud app.
• 2. If the sign-in window pops up, just sign in with your Apple ID.
• 3. There's an All Devices button at the top-left of the window, click on it to call out a drop-down menu and choose your iOS device.
• 4. Click Erase (your device) in the prompt to finalize the process.
• 5. Now you can either recovery data to your device from a backup or set up as new if there isn't any back-up before.

Method Three: How to unlock a disabled iPad in recovery mode?
If you've neither synced with iTunes nor set up Find My iPhone in iCloud, you'll need to wipe your iPad to factory setting to remove the password, which means you'll suffer losing all your data on iPad and get it as a new one.
Please pay attention there is a slight difference in putting different models of iPad into recovery mode.
iPad Air

• 1. Turn off your iPad Air, press and hold the Home button.
• 2. While holding the Home key, connect the USB cable to the device. Wait until the Apple logo appears and keep holding the Home button for few more seconds.
• 3. Continue holding the Home button until the iTunes logo appears.

iPad mini/iPad pro

• 1. Connect your iPad to your computer or laptop and open iTunes.
• 2. While your device is connected, force to restart it.
• 3. Press and hold the Sleep/Wake and Home buttons at the same time. Don't release when you see the Apple logo. Keep holding both buttons until you see the recovery mode screen.

Now you have entered the recovery mode, and

1. When you see the option to Restore and Update, click it.

2. Wait for the process to finish. Then you can set up and use your device.
For more details, check: How to Unlock iPad without Passcode

Turn it off when its off connect the cable that's used to charge it to a pc or laptop making sure ipad is still off hold the home button do not let go now keep it held down until you connect the cable and see a picture symbol showing to connect to iTunes as soon as you see that on the ipad you can let go off the home button if iTunes doesn,t open itself you do it it should now see an ipad in recovery mode click on restore or restore and update please note that this will erase your whole ipad back to factory settings

Connect your ipad to itunes then put it in recivery mode -1 turn on the ipad -2 keep holding the power button and the home button till the device turns of and then turns on -3 release the power button and keep holding the home button till u see and itunes photo on your ipad Now open itunes and restore

Hi.
Here are some solutions for your problem provided by apple.
Resolution

If a single application is not responding or freezes when it opens, you can force it to close:

1. Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.
2. Instead of dragging the red slider, press and hold the Home button for six seconds.
3. If the device does not return to the Home screen, see the steps below to restart.

If the iPad is unresponsive or certain controls aren't working as expected, try restarting the device:

1. To turn iPad off, press and hold the Sleep/Wake button until the red slider appears.
2. Slide your finger across the slider to turn off iPad.
3. To turn iPad on, press and hold the Sleep/Wake button until the Apple logo appears.

If the iPad remains unresponsive or does not turn on (or power on), try resetting the device:

• Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.

If there is no video on iPad, verify that it has enough charge to turn on:

1. Connect iPad to the 10W USB Power Adapter with the Dock Connector to USB Cable.
2. Let iPad charge for at least 20 minutes, then see if it starts up normally.
3. If there is no image on the iPad screen, press the Home button to attempt to wake the device.
4. If the iPad screen displays a red battery icon, let the iPad to continue to charge until it turns on.