Likom lcd autonatic shutdown - Likom HD15A 15" LCD Monitor

No, that is the native resolution of your LCD Monitor, it can not display a higher resolution.

YOU MAY NEED TO UPDATE TO MOST CURRENT SOFTWARE FROM TOSHIBA WEBSITE. CONTACT TOSHIBA OR CHECK THE SUPPORT WEBSITE TO SEE IF CUSTOMER SOFTWARE UPDATES ARE POSSIBLE.

Most LCD monitors use IEC sockets - these are 3pins sockets.
Power leads are available from computer shops and electrical stores.

The best way is to buy a special microfibre cleaning cloth for LCD monitors. Very often the same cloths are used to clean sunglasses so you may already have one of those. Do not use any cleaning liquid. Rub the screen very GENTLY with the cloth until the prints are gone. You can rub fast but remember not to press too hard or you can damage your monitor.

It was stupid, the volume on the monitor had been turned all the way down. I checked to make sure it wasn't muted but never checked the volume level. Thanks anyway.

NEED CHANGE THE LCD BOARD.

Go links:
http://www.aitendo.co.jp/product/230
http://www.garitto.com/product/index/3804758#review

http://www.pchub.com/uph/category/43/LCD-Inverter.html

To use the external vga connector of a laptop, you have to activate it. In many notebooks it is Funtion and F7 (Fn-F7). In your notebook it may be F5 or F6, look for a monitor sigh in the F keys. The activation may sometimes rotate in sequence , ie, External + LCD, LCD, External... and so on.

Just check that your monitor is not set to power down(Control Panel> Power Options) and check that the 'Turn Monitor Off' Power Scheme is set to never and turn off any screensaver to see if it still goes off.