I bought a 16GB DenDyne multi-function USB Digital Assistant and my computer is not loading it. It knows the device is there but shows no memory and am unable to copy files on it. I have Windows XP professional on a Dell computer. Please Help and Thanks in Advance -Mary

ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER
If your photos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.

Format it by using a device like a camera, the computer will not work to format this type of memory. I know this from own experience with 4 different computer in my house..

I would check your C663 manual to make sure your camera is capable of reading a 16GB card. Because thats a fairly large drive for such a a legacy camera I would also insert the card in your PC and format it there to make sure it is functional. Maybe copy some files on it and delete it to make sure the card is working properly.

Hi sir =)

Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com

2 Open up 'My Computer'. You should see it under the list of available drives.

3 Check its contents first to make sure that you have the right drive.

4 In 'My Computer', right-click on the drive and choose 'Format'.

5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.

6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

Are you using software that came with the reader? Maybe that is the problem. Are the correct drivers installed? Check the device manager and make sure it does not show a problem device. Are you using my computer and clicking on the removable device? Does the card work ok in other computers or devices? Is your computer only USB 1.0 and the card reader requres USB 2.0? Are the USB 2.0 drivers properly installed on your computer? Try removing the software and drivers, re-boot, and just install the drivers and not the software.

You need to reinstall your usb drivers.
For that first go to my computer property ->hardware -> device manager
then right click on usb drivers and uninstall all usb drivers 1 by 1.
Then restart computer then check .
If problem still remain then enter in bios setup then go to ide or advanced option then enable "Legacy 2.0" then save settings then restart .
soem times old computer not supports new usb high speed device .

no it shouldn't be, try it in a reader or another device, it maybe bad.

You should try to delete the partition in the Transcend memory stick and creat a new partition. You should copy any files that you need off this memory device before you re-partition it because you will lose all the data that is stored on the device.

Go to the Control Panel - Administrative Tools - Computer Management - Disk Magament.
Scroll down until you see your removeable device the 16Gb memory device, click once on this, It may not show it as Healthy.
Right click in this disk (make sure you do not select the C drive) and click on Delete Partition to remove the partition.
Right click on this unpartition drive and Create a partition.
You may not have to format this partition, it should now show this as a healthy drive.
Exit out of Disk/computer Management and Control Panel.

The USB drive should now function normally.

Does the entire keyboard function with the multi-adapter? I am having the same problem, and i just bought a single ps/2 to usb adapter. If it works, let me know. THanks!