An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: AC adapters
You will definitely want an AC adapter for your camera. You won't want to be tethered to an electrical cord while taking pictures, but when it comes time to edit the pictures stored on your memory card(s) or to download your photos onto a computer, you'll find the job much easier if you're running the camera via an AC adapter. Without the continuous power of an adapter, you'll burn through your batteries.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Kodak has 3 types of charger that can be connected to a wall socket USB AC Adapter - is especially useful when traveling, away from your computer, or just plain on-the-go. Connect your camera's USB cable to the adapter and plug it into a wall outlet to conveniently charge your camera. 5V AC Adapter - Provides in-camera charging for all KODAK EASYSHARE M and V Series Digital Cameras Input: AC 100-240 V 50/60 Hz Output : DC 5.0 V 3V AC Adapter - Provides direct power to your camera but it will not charge the camera battery Input: AC 100-240 V 50/60 Hz Output : DC 3.0 V
* You need to check the type of adapter your using. If your using the 5V AC adapter or USB adapter and the camera won't charge the battery contact kodak support line 1 800 235 6325 (23KODAK) for possible repair.
If an SD memory card is installed, remove the card.
Remove power from the camera as described below:
If you are using only batteries for power, open the battery/memory card door and remove both batteries.
If you are using only the HP AC power adapter, disconnect it from the camera.
If you are using both batteries and the HP AC power adapter, remove both batteries and the power adapter.
Wait for 15 seconds. Then reinsert the batteries and close the battery/memory card door or reconnect the HP AC power adapter to the camera. If you are using both batteries and AC power, try each method separately.
Turn the camera on and off. If the issues is not resolved do the following
Connect the camera to the optional AC power supply
Connect the camera to the optional AC power supply. Ensure that the AC power supply is connected to a working power outlet.
Try turning the camera on.
If the issue is resolved , you do not need to continue with the rest of the instructions in this document.
If the is not resolved ,then repeat setps 1 to 4 abiove but remove the batteries and keep the AC power adapter connected.
Make sure the ac adaptor ius the right polarity for the camera, negative outside plug and positive centre,also make sure the voltage output of the charger is correct 5 volts dc.You do not need batteries as well as the charger.